ad9040

过期

Complete 10-Bit Monolithic Sampling A/D Converter (ADC) with On-Board Track-and-Hold and Reference

数据手册 (Rev. D) 产品选型表
Viewing:

概述

  • CMOS Compatible
  • Low Power: 940 mW
  • 2 V p-p Analog Input
  • 53 dB SNR @ 10 MHz AIN
  • Fully Characterized
    Dynamic Performance
  • On-Chip Track-and-Hold, Reference

The AD9040A is a complete 10-bit monolithic sampling analog-to-digital converter (ADC) with on-board track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only an encode signal to achieve 40 MSPS sample rates with 10-bit resolution.

Digital inputs and outputs are CMOS compatible; the analog input requires a signal of 2 V p-p amplitude. The two-step architecture used in the AD9040A is optimized to provide the best dynamic performance available while maintaining low power requirements of only 940 mW typically; maximum dissipation is 1.1 watt at 40 MSPS.

The signal-to-noise ratio (SNR), including harmonics, is 53 dB, or 8.5 ENOB, when sampling an analog input of 10.3 MHz at 40 MSPS. Competitive devices perform at less than 7.5 ENOB and require external references and larger input signals.

The AD9040A A/D converter is available as either a 28-pin plastic DIP or a 28-pin SOIC. The two models operate over a commercial temperature range of 0°C to +70°C. Contact the factory regarding availability of ceramic military temperature range devices.

推荐替代产品

AD9203 量产

10位、40 MSPS、低功耗模数转换器

ad9040
Complete 10-Bit Monolithic Sampling A/D Converter (ADC) with On-Board Track-and-Hold and Reference
pdp-image-unavailable
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

创建新项目
提问

参考资料

数据手册 2

应用笔记 1

技术文章 1

停产数据手册 1

了解更多
添加至 myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

创建新项目

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

最新评论

需要发起讨论吗？ 没有关于 AD9040的相关讨论？是否需要发起讨论？

在EngineerZone®上发起讨论

近期浏览