HMC713MS8

54 dB, Logarithmic Detector/Controller SMT, 45 - 2700 MHz

Data Sheet Product Selection Table
Viewing:

Overview

  • Wide Dynamic Range: up to 54 dB
  • High Accuracy:
    ±1 dB with 54 dB Range up to 2.7 GHz
  • Fast Output Response Time
  • Supply Voltage: +2.7 to +5.5V
  • Power-Down Mode
  • Excellent Stability over Temperature
  • MSOP-8 SMT Package: 14.8 mm²

The HMC713MS8(E) Logarithmic Detector/Controller is ideal for converting RF signals with frequencies in the 45 MHz to 2700 MHz range, to a proportional DC voltage at its output. The HMC713MS8(E) employs a successive compression technology which delivers 54 dB of dynamic range with high conversion accuracy over a wide input frequency range. As the input signal is increased, successive amplifi ers move into saturation one by one creating an accurate approximation of the logarithm function.

The outputs of a series of detectors are summed, converted into voltage domain and buffered to drive the OUT output. For detection mode, the OUT pin is connected to the VSET input and will provide a nominal logarithmic slope of 17 mV/dB and an intercept of -68 dBm. The HMC713MS8(E) can also be used in the controller mode where an external voltage is applied to the VSET pin to create an AGC or APC feedback loop.

Applications

  • Cellular Infrastructure
  • WiMAX, WiBro & LTE/4G
  • Power Monitoring & Control Circuitry
  • Receiver Signal Strength Indication (RSSI)
  • Automatic Gain & Power Control
  • Military, ECM & Radar
HMC713MS8
54 dB, Logarithmic Detector/Controller SMT, 45 - 2700 MHz
HMC713MS8_fbl
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

S-Parameter 1

Latest Discussions

No discussions on HMC713MS8 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed