The AD605 is a low noise, accurate, dual-channel, linear-in-dB variable gain amplifier (VGA), optimized for any application requiring high performance, wide bandwidth variable gain control. Operating from a single 5 V supply, the AD605 provides differential inputs and unipolar gain control for ease of use. Added flexibility is achieved with a user-determined gain range and an external reference input that provide user-determined gain scaling (dB/V).

The high performance linear-in-dB response of the AD605 is achieved with the differential input, single-supply, exponential amplifier (DSX-AMP) architecture. Each of the DSX-AMPs comprises a variable attenuator of 0 dB to −48.4 dB followed by a high speed, fixed-gain amplifier. The attenuator is based on a 7-stage R-1.5R ladder network. The attenuation between tap points is 6.908 dB, and 48.360 dB for the entire ladder network. The DSX-AMP architecture results in 1.8 nV/√Hz input noise spectral density and accepts a ±2.0 V input signal when VOCM is biased at VP/2.

Each independent channel of the AD605 provides a gain range of 48 dB that can be optimized for the application. Gain ranges between −14 dB to +34 dB and 0 dB to +48 dB can be selected by a single resistor between Pin FBK and Pin OUT. The lower and upper gain ranges are determined by shorting Pin FBK to Pin OUT or leaving Pin FBK unconnected, respectively. The two channels of the AD605 can be cascaded to provide 96 dB of very accurate gain range in a monolithic package.

The gain control interface provides an input resistance of approximately 2 MΩ and scale factors from 20 dB/V to 30 dB/V for a VREF input voltage of 2.5 V to 1.67 V, respectively. Note that scale factors up to 40 dB/V are achievable with reduced accuracy for scales above 30 dB/V. The gain scales linearly in dB with control voltages (VGN) of 0.4 V to 2.4 V for the 20 dB/V scale and 0.20 V to 1.20 V for the 40 dB/V scale. When VGN is <50 mV, the amplifier is powered down to draw 1.9 mA. Under normal operation, the quiescent supply current of each amplifier channel is only 18 mA.

The AD605 is available in a 16-lead PDIP and a 16-lead SOIC_N package and is guaranteed for operation over the −40°C to +85°C temperature range.

Applications

Ultrasound and sonar time-gain controls

High performance AGC systems

Signal measurement

Data Sheet, Rev. E, 5/07

Part#	Gain Control	-3 dB BW (MHz)	Gain Low End (dB)	Gain High End (dB)	Number of Channels	Spectral Noise (nV/rtHz)	Supply Voltage (V)	Supply Current (max)	Gain Accuracy (dB)	1 dB Comp Point (dBm)	Package	Price* (1000-4999)
AD600	Analog	35	0	+40	2	1.4	±5	14mA	-	-	-	$16.61
AD602	Analog	35	-10	+30	2	1.4	±5	14mA	-	-	-	$13.36
AD603	Analog	90	-11	+31	1	1.4	±5	20mA	±0.5	-	8-Lead DIP, 8-Lead SOIC	$4.40
AD604	Analog	40	0	+48	2	0.8	±5	31mA	±0.3	15	24-Lead SOIC, 24-Lead SSOP	$16.45
AD605	Analog	40	-14	+34	2	1.8	+5	23mA	±0.2	15	16-Lead SOIC	$9.91
AD8260	Digital	180	-6	+24	1	2.4	+3.3	28mA	+0.25	-	-	$3.84
AD8320	Digital	150	-10	+26	1	53	+12	105mA	±0.2	22.5	20-Lead SOIC	-
AD8321	Digital	120	-27.4	+26	1	20	+9	90mA	±1	19.5	20-Lead SOIC	$4.40
AD8322	Digital	180	-12.6	+29.5	1	64	+5	113mA	±2	19	28-Lead TSSOP	$3.19
AD8323	Digital	100	-26	+27.5	1	-	+5	-	-	-	28-Lead TSSOP	$3.34
AD8324	Digital	100	-25.5	+33.5	1	157	+3.3	207mA	±1	21	20-Lead LFCSP, 20-Lead QSOP	$1.73
AD8325	Digital	100	-29.5	+30	1	56	+5	133mA	±1	18.5	28-Lead TSSOP	$3.34
AD8326	Digital	100	-26	+27.5	1	100	±5	157mA	±1	26.5	28-Lead PSOP, 28-Lead TSSOP	$3.95
AD8327	Digital	160	-18	+30	1	64	+5	105mA	±1	18	20-Lead TSSOP	$3.80
AD8328	Digital	107	-27.5	+31.5	1	135	-	120mA	±1	18.4	20-Lead LFCSP, 20-Lead QSOP	$1.92
AD8330	Analog	150	0	+50	1	5	+6	20mA	±0.5	-	16-Lead LFCSP, 16-Lead QSOP	$4.44
AD8331	Analog	120	-4.5	+43	1	0.74	+5	25mA	+0.5	7	-	$5.45
AD8332	Analog	120	-4.5	+43.5	2	0.74	+5	58mA	+0.5	7	28-Lead TSSOP, 32-Lead CSP	$10.57
AD8334	Analog	100	+4.5	+43.5	4	0.74	+5	116mA	+0.5	7	64-Lead LFCSP	$14.66
AD8335	Analog	70	-10	+38	4	1.3	+5	76mA	±0.2	18	64-Lead LFCSP	$12.14
AD8336	Analog	115	-14	+46	1	3	±12	25mA	±0.5	11	16-Lead LFCSP	$4.59
AD8337	Analog	280	0	+24	1	2.2	±5	15mA	±0.25	-	8-Lead LFCSP	$2.52
AD8367	Analog	500	-2.5	+42.5	1	1.84	+5.5	26mA	±0.2	8.1	14-Lead TSSOP	$4.60
AD8368	Analog	800	-12	+22	1	-	+5	-	±0.4	13	24-Lead LFCSP	$4.60
AD8369	Digital	600	-5	+40	1	2	+5.5	37mA	±0.5	0.5	16-Lead TSSOP	$4.25
AD8370	Digital	700	+25	+34	1	2.1	+5.5	78mA	-	14	16-Lead TSSOP	$4.25
AD8375	Digital	690	-4	+20	1	-	+5	130mA	±0.2	19	24-Lead LFCSP	$4.54
AD8376	Digital	690	-4	+20	2	-	+5	260mA	±0.2	19	32-Lead CSP	$6.57
ADL5330	Analog	3000	-34	+22	1	-	+5	240mA	-	1.2	24-Lead LFCSP	$5.04
ADL5390	Analog	2400	-	+7	1	-	+5	130mA	-	9.6	24-Lead LFCSP	$7.59
ADL5391	Analog	2000	-	+9.5	1	26.7	+5	135mA	-	15.1	16-Lead LFCSP	$4.95
ADL5592	Digital	2400	-	+30.5	1	-	-	-	-0.02	-	40-Lead LFCSP	-

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

モデル名はある製品の特定のバージョンを表し、購入やサンプルの入手が可能です。

製品状況は製品サイクルにおける現在の状況を示し、以下の4つの段階があります。

• 発売前：このモデルはまだ全面的な製造には至っていませんが、サンプルは入手できます。
• 製造：現在、このモデルは製造しておりますので、製品の購入とサンプルの入手が可能です。
• 最終販売：このモデルは製造中止が予定されておりますが、まだしばらくの間は販売しております。
• 製造中止製品：この製品はすでに製造中止となっており、販売しておりません。

本製品のパッケージ（DIP、SOIC、BGAなど）。評価用ボードはモデルの性能を示すために設計されたボードで、デバイスはこのボード上に収納されています。

パッケージの詳細図および化学組成については、パッケージのサイトをご覧ください

ピン数はデバイス上のピンやボール、パッドの数です。ピン配置図および機能についてはデータシートをご覧ください。

アナログ・デバイセズの製品モデルは、許容できる動作温度範囲が以下のように規定されています。
モデル名によりそれぞれ動作温度範囲が異なる場合がありますので、詳細についてはデータシートでご確認ください。

• 商用温度範囲：0～70℃
• 軍用温度範囲：－55～＋125℃
• 拡張工業用温度範囲（1）：－40～＋85℃
  拡張工業用温度範囲（2）：－40～＋105℃
  拡張工業用温度範囲（3）：－40～＋125℃

価格は1個当たりの米ドルで、米国内における販売価格（FOB）で表示されておりますので、予算のためにのみご使用いただけます。　また、その価格は変更されることがあります。米国以外のお客様への価格は、輸送費、各国の税金、手数料、為替レートにより決定されます。価格・納期等の詳細情報については、弊社正規販売代理店または担当営業にお問い合わせください。なお、　評価用ボードおよび評価用キットの表示価格は1個構成としての価格です。

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.
Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

環境問題に対応した鉛フリー版も提供しております。詳細については、 鉛フリー情報をご覧ください.