Features and Benefits
- Ultralow noise preamplifier (preamp)
- Voltage noise = 0.74 nV/√Hz
- Current noise = 2.5 pA/√Hz
- 3 dB bandwidth: 100 MHz
- Low power: 145 mW/channel
- Wide gain range with programmable postamp
- −4.5 dB to +43.5 dB in LO gain mode
- 7.5 dB to 55.5 dB in HI gain mode
- Low output-referred noise: 48 nV/√Hz typical
- Active input impedance matching
- Optimized for 10-bit/12-bit ADCs
- Selectable output clamping level
- Single 5 V supply operation
- AD8332 and AD8334 available in lead frame chip scale package
The AD8334 is an ultralow noise, quad channel linear-in-dB variable gain amplifier (VGA). Although optimized for ultrasound systems, it may be used as a low noise variable gain control in any application whose operating frequency is less than 100 MHz.
Included in each channel are an ultralow noise preamp (LNA), an X-AMP® VGA with 48 dB of gain range, and a selectable gain postamp with adjustable output limiting. The LNA gain is 19 dB with a single-ended input and differential outputs. Using a single resistor, the LNA input impedance can be adjusted to match a signal source without compromising noise performance.
The 48 dB gain range of the VGA makes these devices suitable for a variety of applications. Excellent bandwidth uniformity is maintained across the entire range. The gain control interface provides precise linear-in-dB scaling of 50 dB/V for control voltages between 40 mV and 1 V. Factory trim ensures excellent part-to-part and channel-to-channel gain matching. Differential signal paths result in superb second- and third-order distortion performance and low crosstalk.
The AD8334 is a quad version of the single AD8331 and dual AD8332.
For information on specs, see the AD8331/AD8332/AD8334 datasheet.
- Ultrasound and sonar time-gain controls
- High performance automatic gain control (AGC) systems
- I/Q signal processing
- High speed, dual ADC drivers
Product Lifecycle Production
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
Evaluation Kits (1)
The board is shipped assembled and tested, and users need to only connect the signal and VGAIN sources and a single 5 V power supply.The AD8332-EVALZ is lead free and RoHS compliant.
Refer to AD8334 data sheet for configuring the input impedance and further details.
Tools & Simulations
AD8334 SPICE Macro Models
ADIsimPE, which is powered by SIMetrix/SIMPLIS, is a circuit simulation suite optimized for the design and development of analog and mixed signal circuits. SIMetrix mode is ideal for the simulation of general non-switching circuits. It provides full Pspice compatibility for use with industry-standard SPICE models. SIMPLIS (SIMulation Piecewise-Linear System) mode simulates the operation of switching circuits with vastly improved robustness, speed, and accuracy compared to standard SPICE. It is particularly useful for switching power supply, PLLs, and ADC/DAC applications.
Product Selection Guide (1)
Technical Articles (1)
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
Sample & Buy
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.