AD8133 is a major advancement beyond using discrete op amps for driving differential RGB signals over twisted pair cable. The AD8133 is a triple low-cost differential or single ended input to differential output driver, and each amplifier has a fixed gain of 2 to make up for the attenuation of line termination resistors. The AD8133 is specifically designed for RGB signals but can be used for any type of analog signals or for high-speed data transmission. The AD8133 is capable of driving either Category 5 Unshielded Twisted Pair (UTP) cable or backplanes with minimal signal degradation.

Part#	-3 dB BW (MHz)	0.1 dB Flatness (MHz)	Minimum Gain (Acl)	Slew Rate (V/us)	Disable	Pos Supply	Supply Current (max)	Features	Package	Price* (1000-4999)
AD8131	400	85	2	2000	-	+2.7V to +11V	10.25mA	-	8-Lead MSOP, 8-Lead SOIC	$1.82
AD8133	450	55	2	1600	X	+2.8V to +11V	26mA	-	24-Lead LFCSP	$2.62
AD8134	450	55	2	1600	X	+4.5V to +11V	26.5mA	Sync-on-CM	24-Lead LFCSP	$2.62
AD8146	700	200	2	3000	X	+4.5V to ±5.5V	61.5mA	Adjustable Output Common Mode Voltage	24-Lead LFCSP	$2.92
AD8147	600	235	2	3000	X	+4.5V to +5.5V	61.5mA	Sync on Common Mode	24-Lead LFCSP	$3.03
AD8148	700	235	4	3000	X	+4.5V to +5.5V	62.5mA	Sync on Common Mode	24-Lead LFCSP	$3.13
AD8394	-	-	-	-	-	- to -	-	-	20-Lead TSSOP, 24-Lead LFCSP	$2.07
ADL5321	-	-	-	-	-	- to -	84mA	-	3-Lead SOT-89	$2.58

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.