Add to Signal Chain Designer

ADM1065:  Super Sequencer™ and Monitor

Product Details


The ADM1065 Super Sequencer® is a configurable supervisory/ sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple-supply systems.

The device also provides up to 10 programmable inputs for monitoring undervoltage faults, overvoltage faults, or out-of-window faults on up to 10 supplies. In addition, 10 programmable outputs can be used as logic enables. Six of these programmable outputs can each provide up to a 12 V output for driving the gate of an N-FET that can be placed in the path of a supply.

The logical core of the device is a sequencing engine. This state machine-based construction provides up to 63 different states. This design enables very flexible sequencing of the outputs based on the condition of the inputs.

The ADM1065 is controlled via configuration data that can be programmed into an EEPROM. The whole configuration can be programmed using an intuitive GUI-based software package provided by Analog Devices, Inc.

Applications

  • Central office systems
  • Servers/routers
  • Multivoltage system line cards
  • DSP/FPGA supply sequencing
  • In-circuit testing of margined supplies

FEATURES and BENEFITS

  • Complete supervisory and sequencing solution for up to 10 supplies
  • 10 supply fault detectors enabling supervision of supplies to
    <0.5% accuracy at all voltages at 25°C
    <1.0 % accuracy across all voltages and temperatures
  • 5 selectable input attenuators allow supervision:
    Supplies up to 14.4 V on VH
    Supplies up to 6 V on VP1-4
  • 5 dual function inputs VX1-5:
    High impedance input to supply fault detector with thresholds between 0.573 V and 1.375 V
    General-purpose logic input
  • 10 programmable driver outputs, PDO1 to PDO10 (PDOx)
    Open-collector with external pull-up
    Push/pull output driven to VDDCAP or VPx
    Open collector with weak pull-up to VDDCAP or VPx
  • Sequencing engine (SE) implements state machine control of
    PDO outputs
    State changes conditional on input events
    Enables complex control of boards
    Power-up and power-down sequence control
    Fault event handling
  • See datasheet for additional information

Typical Application Circuit Diagram for ADM1065

Documentation

Title Content Type File Type
ADM1065: Super Sequencer and Monitor Data Sheet  (Rev D, 06/2011) (pdf, 508 kB) Data Sheets PDF
AN-1009: Block Erasing, Reading and Writing to the ADM106x EEPROM  (pdf, 63 kB) Application Notes PDF
AN-1086: Using an ADM106x in a Hot Swap Application  (PDF, 59 kB)
Describes the design considerations that must be taken into account when the input supplies to the ADM106x come up when a card is hot swapped in a live, powered backplane.
Application Notes PDF
AN-0997: Ping-Pong Configuration Guide for ADM1062 to ADM1069 Devices  (pdf, 172 kB) Application Notes PDF
AN-1001: Checksum Calculations  (pdf, 76 kB) Application Notes PDF
AN-897: ADC Readback Code  (pdf, 65 kB) Application Notes PDF
AN-0973: Erasing and Programming the Sequencing Engine EEPROM  (pdf, 61 kB) Application Notes PDF
AN-0975: Automatic Generation of State Diagrams for the ADM1062 to ADM1069 Using Graphviz  (pdf, 209 kB) Application Notes PDF
AN-722: Watchdog Detection Using the ADM106x  (pdf, 179 kB) Application Notes PDF
AN-698: Configuration Registers of ADM1062/ADM1063/ADM1064/ADM1065/ADM1066/ADM1067/ADM1166  (pdf, 561 kB) Application Notes PDF
AN-782: Monitoring High Voltages with the ADM1062-ADM1069 Super Sequencers™  (pdf, 61 kB) Application Notes PDF
AN-781: Monitoring Additional Supplies with the ADM1062-ADM1069 Super Sequencers™  (pdf, 96 kB) Application Notes PDF
AN-780: Monitoring Negative Voltages with the ADM1062 to ADM1069 Super Sequencers  (pdf, 98 kB) Application Notes PDF
AN-723: Interrupt Generation Using the ADM106x  (pdf, 262 kB) Application Notes PDF
UG-404: USB-SDP-CABLEZ Serial Interface Board  (pdf, 536 kB)
The USB-SDP-CABLEZ is primarily used to communicate with certain Analog Devices evaluation boards.
User Guides PDF
SuperSequencer Documentation User Guides HTML
Temperature monitor measures three thermal zones
by Susan Pratt, Analog Devices, Inc. (EDN, 12/11/03)
Technical Articles HTML
Supervisory Devices Complementary Parts Guide for Altera FPGAs  (pdf, 664 kB) Product Selection Guide PDF
Supervisory Devices Complementary Parts Guide for Xilinx FPGAs  (pdf, 661 kB) Product Selection Guide PDF
Voltage Monitoring and Sequencing (2009/2010)  (pdf) Overview PDF
Optical and High Speed Networking  (pdf, 2236 kB)
Analog Devices’ optical and high speed networking ICs solve a depth and breadth of challenges faced by today’s designers of datacom and telecom systems, optical modules, and subsystems. Analog Devices products address a wide range of networking applications from O/E/O conversion, clock recovery, and backplane transmission to monitoring and control of optical power, power management, and clock generation and distribution.
Overview PDF
Power System Management (Spring 2007)  (pdf, 1170 kB) Overview PDF
Power Supply Sequencing Bulletin (2007)  (pdf, 5188 kB) Solutions Bulletins PDF
RAQs index Rarely Asked Questions HTML
Glossary of EE Terms Glossary HTML

Design Tools,Models,Drivers & Software

Title Content Type File Type
SuperSequencer Software
Requires the ADMxxxx Common Run-time to be installed in order to provide driver support for the USB-SMBUS-CABLEZ and USB-SDP-CABLEZ interface connectors. If there are previous versions of this software (v4.0.6 or earlier), or the ADM1175-7 & ADM1191-92 software (v3.0.1 or earlier) installed they should be removed prior to installing the common run-time.
Evaluation Software HTML
ADMxxxx Common Run-Time
This run-time installer is shared between the SuperSequencer, ADM1175-92 and ADM1293/4 and the Hot Swap and Power Monitor tools. Contains driver support for the USB-SMBUS-CABLEZ and USB-SDP-CABLEZ interface connectors.
Evaluation Software HTML

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

ADM1065 Model Options
Model Package Pins Temp.
Range
Packing,
Qty
Price*(100-499) Price*1000 pcs RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
ADM1065ACPZ Status: Production 40 ld LFCSP (6x6mm w.4.1mm pad) 40 Ind Tray, 490 $6.68 $5.82 Y  Material Info PCN Purchase Sample
ADM1065ASUZ Status: Production 48 ld TQFP (7x7mm) 48 Ind Tray, 250 $6.68 $5.82 Y  Material Info PCN Purchase Sample
ADM1065ASUZ-RL7 Status: Production TQFP 1.0 MM 48 Ind Reel, 500 - $5.82 Y  Material Info Notify Me Purchase Sample
Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ADM1065 Evaluation Board
Model Description Price RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
EVAL-ADM1065TQEBZ Status: Production Evaluation board for device allowing user to configure the board to match their own configuration. The kit includes a TQFP socket. Multiple boards can be cascaded (cable included), allowing evaluation of multi-device systems. $303.60 Yes -
SOCKET-ADM106XLFZ Status: Production Optional LFCSP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required. $120.00 Yes -
SOCKET-ADM106XTQZ Status: Production Optional TQFP Socket for ADM1062-67 and ADM1166. This can be used with the evaluation board if required. $95.00 Yes -
USB-SDP-CABLEZ Status: Production USB to Serial I/O Interface. One is required and can support multiple eval kits. $89.00 Yes -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices

沪ICP备09046653号
content here.
content here.

Review this Product

Close