HMC900

NOT RECOMMENDED FOR NEW DESIGNS

50 MHz Dual Baseband Programmable Low Pass Filter

Part Models: 1
1ku List Price: price unavailable

Viewing:

Overview

Low Noise Figure: 12 dB
High linearity: Output IP3 +30 dBm
Programmable Bandwidth:
3.5 to 50 MHz
Exceptional 3 dB
Bandwidth Accuracy: ±2.5%
6th order Butterworth
Magnitude & Phase Response
Automatic Filter Calibration
Externally Controlled Common Mode
Output Level Simplifies Interface
Read/Write Serial Port Interface (SPI)
32 Lead 5x5 mm SMT Package: 25 mm²

The HMC900LP5E is a 6th order, programmable bandwidth, fully calibrated, dual low pass filter. It features 0 or 10 dB input gain setting and supports arbitrary bandwidths from 3.5 to 50 MHz, and when calibrated, is accurate to ±2.5% of the desired bandwidth. It includes a filter bypass option with a bandwidth of 100 MHz, while retaining gain and common mode settings.

Housed in a compact 5x5mm SMT QFN package, the HMC900LP5E requires minimal external components and provides a low cost alternative to more complicated switched discrete filter architectures. Filter calibration for the HMC900LP5E is accomplished with any reference clock rate from 20 to 80 MHz. One time programmable (OTP) memory offers unsurpassed flexibility allowing the user "set and forget" parameters like gain, and bandwidth setting.

Matched filter paths provide excellent quadrature balance, making the HMC900LP5E ideal for I/Q communications applications. The 6th order Butterworth transfer function delivers superior stop band rejection while maintaining both a flat passband and minimal group delay variation.

Applications

Baseband Filtering for A/D or D/A Converters
Point-to-Point, Fixed Wireless & Cellular Base Station Transceivers
Integrated Direct Conversion Receiver (DCR)
Software Defined Radio Applications
Test & Measurement Equipment

Part Models: 1
1ku List Price: price unavailable

Documentation

Data Sheet 1

HMC900 Data Sheet 04/22/2015

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
HMC900LP5ETR	32-Lead QFN (5mm x 5mm w/ EP)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

Jul 28, 2022 - 22_0023 Product Discontinuance for Select Analog Devices Parts (ADFXXXX, HMCXXX)
		PDN22_0023_Form Material_Report
HMC900LP5ETR		PDN22_0023_Form Material_Report

This is the most up-to-date revision of the Data Sheet.

Software Resources

Evaluation Software 1

HMC900LP5E Evaluation Software

hmc900lp5e-evaluation-software

Can't find the software or driver you need?

Tools & Simulations

ADIsimRF

ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.

Open Tool