Analog Devices RF and microwave components are available as drop-in X-MWblocks^®
from Quantic^™ X-Microwave.

Get the X-MWblock® drop-in module for this part.

HMC1081

GaAs MMIC Mixer, 50 - 75 GHz

Data Sheet

Viewing:

Overview

Passive: No DC Bias Required
Low LO Power: 12 dBm
High LO/RF Isolation: 28 dB

Wide IF Bandwidth: DC to 26 GHz
Upconversion & Downconversion Applications
Die Size: 1.23 × 1.21 × 0.1 mm

The HMC1081 is a double balanced mixer. It can be used as an upconverter or a downconverter, with DC to 26 GHz at the IF port and 50 to 75 GHz at the RF port. This passive MMIC mixer is fabricated with GaAs Shottky diode technology. All bond pads and the die backside are Ti/Au metallized and the Shottky devices are fully passivated for reliable operation. All data shown herein is measured with the chip in a 50Ω environment and contacted with RF probes.

APPLICATIONS

E-Band Communications Systems
Test Equipment & Sensors
Military End-Use
Automotive Radar

Documentation

Data Sheet 1

HMC1081 Data Sheet 04/22/2015

This is the most up-to-date revision of the Data Sheet.

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

Design Tool 1

HMC1081 Outline Drawing

ADIsimRF

ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.

Open Tool

Latest Discussions

2 Years Ago