HMC1058

GaAs MMIC Sub-Harmonic Mixer, 71 - 86 GHz

Viewing:

Overview

Passive: No DC Bias Required
Low LO Power: 9 dBm
High LO/RF Isolation: 28 dB
High 2LO/RF Isolation: 43 dB

Wide IF Bandwidth: DC to 12 GHz
Upconversion & Downconversion
Applications
Die Size: 1.15 × 0.97 x 0.1 mm

The HMC1058 is a sub-harmonically pumped MMIC mixer. It can be used as an upconverter or a downconverter, with DC to 12 GHz at the IF port and 71 to 86 GHz at the RF port. This passive MMIC mixer is fabricated with GaAs Shottky diode technology. All bond pads and the die backside are Ti/Au metallized and the Shottky devices are fully passivated for reliable operation. All data shown herein is measured with the chip in a 50 Ohm environment and contacted with RF probes.

APPLICATIONS

E-Band Communications Systems
Test Equipment & Sensors
Military End Use
Automotive Radar

Documentation

Data Sheet 1

HMC1058 Data Sheet 04/22/2015

This is the most up-to-date revision of the Data Sheet.

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

Design Tool 1

HMC1058 Outline Drawing

ADIsimRF

ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.

Open Tool

Latest Discussions

2 Years Ago