LT8610AC
LT8610AC-1
PRODUCTION
42V, 3.5A Synchronous Step-Down Regulator with 2.5μA Quiescent Current
- Part Models
- 24
- 1ku List Price
- Starting From $5.67
Overview
- LT8610 Feature Set, Plus:
- 3V Minimum Input Voltage
- 800mV Feedback Voltage
- 3.5A Maximum Output Current
- Fast 30ns Minimum Switch-On Time
- Improved Burst Mode Efficiency
- Improved EMI
- Wide Input Voltage Range: 3V to 42V
- Ultralow Quiescent Current Burst Mode® Operation:
- 2.5μA IQ Regulating 12VIN to 3.3VOUT
- Low Dropout Under All Conditions: 200mV at 1A
- High Efficiency Synchronous Operation:
- 95% Efficiency at 1A, 5VOUT from 12VIN
- 93% Efficiency at 1A, 3.3VOUT from 12VIN
- Safely Tolerates Inductor Saturation in Overload
- Adjustable and Synchronizable Frequency:
- LT8610AC: 200kHz to 2.2MHz
- LT8610AC-1: 1.5MHz to 2.2MHz
- Accurate 1.015V Enable Pin Threshold
- Output Soft-Start and Tracking
- Small Thermally Enhanced 16-Lead MSOP Package
- AEC-Q100 Qualified for Automotive Applications
The LT8610AC/LT8610AC-1 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5μA of quiescent current. Compared to the LT8610AB, the LT8610AC/LT8610AC-1 has a lower feedback voltage of 800mV and a lower minimum VIN of 3V. The LT8610AC/LT8610AC-1 has the same additional features of the LT8610AB as compared to the LT8610: higher maximum output current of 3.5A, faster minimum on time of 30ns, and higher light load efficiency.
The LT8610AC/LT8610AC-1 has a SYNC pin for synchronization to an external clock. A capacitor on the TR/SS pin programs the output voltage ramp rate during startup. The PG flag signals when VOUT is within ±8% of the programmed output voltage as well as fault conditions. The LT8610AC-1 has internal compensation optimized for high switching frequencies resulting in improved transient response compared to the LT8610AC. The LT8610AC-1 also has a feature which will soft-start the part when exiting dropout or brownout conditions reducing output voltage overshoot.
| Feedback Voltage | Min VIN | Output Current | Notes | |
| LT8610AC-1 | 0.80V | 3.0V | 3.5A | FSW = 1.5MHz to 2.2MHz, Optimized Transient Response |
| LT8610AC | 0.80V | 3.0V | 3.5A | FSW = 200kHz to 2.2MHz |
| LT8610AB | 0.97V | 3.4V | 3.5A | Improved Burst Mode Efficiency |
| LT8610AX | 0.97V | 3.4V | 3.5A | 175°C Max Junction Temp |
| LT8610A | 0.97V | 3.4V | 3.5A | Higher IOUT, 30ns Min On Time |
| LT8610 | 0.97V | 3.4V | 2.5A | - |
Applications
- Automotive and Industrial Supplies
- GSM Power Supplies
Documentation
Data Sheet 1
Technical Articles 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| LT8610ACEMSE#PBF | 16-Lead MSOP w/ EP | ||
| LT8610ACEMSE#TRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACEMSE#WPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACEMSE#WTRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACEMSE-1#PBF | 16-Lead MSOP w/ EP | ||
| LT8610ACEMSE-1#TRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACEMSE-1#WPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACEMSE-1#WTRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE#PBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE#TRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE#WPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE#WTRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE-1#PBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE-1#TRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE-1#WPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACHMSE-1#WTRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE#PBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE#TRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE#WPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE#WTRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE-1#PBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE-1#TRPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE-1#WPBF | 16-Lead MSOP w/ EP | ||
| LT8610ACIMSE-1#WTRPBF | 16-Lead MSOP w/ EP |
| Part Models | Product Lifecycle | PCN |
|---|---|---|
|
Apr 9, 2025 - 25_0016 Bond Wire Change from Gold to Copper Wire (Notification Only) |
||
| LT8610ACEMSE#PBF | PRODUCTION | |
| LT8610ACEMSE#TRPBF | PRODUCTION | |
| LT8610ACIMSE#PBF | PRODUCTION | |
| LT8610ACIMSE#TRPBF | PRODUCTION | |
|
Jun 5, 2024 - 24_0003 Epoxy Change from Henkel 8290 to 8290A for MSOP Package (2) |
||
| LT8610ACEMSE#PBF | PRODUCTION | |
| LT8610ACEMSE#TRPBF | PRODUCTION | |
| LT8610ACEMSE#WPBF | PRODUCTION | |
| LT8610ACEMSE#WTRPBF | PRODUCTION | |
| LT8610ACEMSE-1#PBF | PRODUCTION | |
| LT8610ACEMSE-1#TRPBF | PRODUCTION | |
| LT8610ACEMSE-1#WPBF | PRODUCTION | |
| LT8610ACEMSE-1#WTRPBF | PRODUCTION | |
| LT8610ACHMSE#PBF | PRODUCTION | |
| LT8610ACHMSE#TRPBF | PRODUCTION | |
| LT8610ACHMSE#WPBF | PRODUCTION | |
| LT8610ACHMSE#WTRPBF | PRODUCTION | |
| LT8610ACHMSE-1#PBF | PRODUCTION | |
| LT8610ACHMSE-1#TRPBF | PRODUCTION | |
| LT8610ACHMSE-1#WPBF | PRODUCTION | |
| LT8610ACHMSE-1#WTRPBF | PRODUCTION | |
| LT8610ACIMSE#PBF | PRODUCTION | |
| LT8610ACIMSE#TRPBF | PRODUCTION | |
| LT8610ACIMSE#WPBF | PRODUCTION | |
| LT8610ACIMSE#WTRPBF | PRODUCTION | |
| LT8610ACIMSE-1#PBF | PRODUCTION | |
| LT8610ACIMSE-1#TRPBF | PRODUCTION | |
| LT8610ACIMSE-1#WPBF | PRODUCTION | |
| LT8610ACIMSE-1#WTRPBF | PRODUCTION | |
|
Jul 12, 2022 - 22_0157 UTAC Thai Limited (UTL) as Alternate Assembly Site for MSOP Packages [With Modification in BOM] |
||
| LT8610ACEMSE#PBF | PRODUCTION | |
| LT8610ACEMSE#TRPBF | PRODUCTION | |
| LT8610ACHMSE#WPBF | PRODUCTION | |
| LT8610ACHMSE#WTRPBF | PRODUCTION | |
|
Jun 21, 2022 - 22_0050 UTAC Thai Limited (UTL) as Alternate Assembly Site for MSOP Packages / Devices |
||
| LT8610ACEMSE#PBF | PRODUCTION | |
| LT8610ACEMSE#TRPBF | PRODUCTION | |
|
Feb 4, 2020 - 20_0132 Laser Top Mark for 16-Lead MSOP Packages Assembled in ADPG and UTAC |
||
| LT8610ACEMSE#PBF | PRODUCTION | |
| LT8610ACEMSE#TRPBF | PRODUCTION | |
| LT8610ACEMSE-1#PBF | PRODUCTION | |
| LT8610ACEMSE-1#TRPBF | PRODUCTION | |
| LT8610ACEMSE-1#WPBF | PRODUCTION | |
| LT8610ACEMSE-1#WTRPBF | PRODUCTION | |
| LT8610ACHMSE#PBF | PRODUCTION | |
| LT8610ACHMSE#TRPBF | PRODUCTION | |
| LT8610ACHMSE-1#PBF | PRODUCTION | |
| LT8610ACHMSE-1#TRPBF | PRODUCTION | |
| LT8610ACHMSE-1#WPBF | PRODUCTION | |
| LT8610ACHMSE-1#WTRPBF | PRODUCTION | |
| LT8610ACIMSE#PBF | PRODUCTION | |
| LT8610ACIMSE#TRPBF | PRODUCTION | |
| LT8610ACIMSE-1#PBF | PRODUCTION | |
| LT8610ACIMSE-1#TRPBF | PRODUCTION | |
| LT8610ACIMSE-1#WPBF | PRODUCTION | |
| LT8610ACIMSE-1#WTRPBF | PRODUCTION | |
|
Apr 11, 2019 - 19_0067 Notification of Wafer Fab Location Change for 0.35 BCD Process |
||
| LT8610ACEMSE#PBF | PRODUCTION | |
| LT8610ACEMSE#TRPBF | PRODUCTION | |
| LT8610ACEMSE-1#PBF | PRODUCTION | |
| LT8610ACEMSE-1#TRPBF | PRODUCTION | |
| LT8610ACHMSE#PBF | PRODUCTION | |
| LT8610ACHMSE#TRPBF | PRODUCTION | |
| LT8610ACHMSE-1#PBF | PRODUCTION | |
| LT8610ACHMSE-1#TRPBF | PRODUCTION | |
| LT8610ACIMSE#PBF | PRODUCTION | |
| LT8610ACIMSE#TRPBF | PRODUCTION | |
| LT8610ACIMSE-1#PBF | PRODUCTION | |
| LT8610ACIMSE-1#TRPBF | PRODUCTION | |
|
Feb 14, 2025 - 25_0016 Bond Wire Change from Gold to Copper Wire (Notification Only) |
||
| LT8610ACEMSE-1#PBF | PRODUCTION | |
| LT8610ACEMSE-1#TRPBF | PRODUCTION | |
| LT8610ACHMSE#PBF | PRODUCTION | |
| LT8610ACHMSE#TRPBF | PRODUCTION | |
| LT8610ACIMSE-1#PBF | PRODUCTION | |
| LT8610ACIMSE-1#TRPBF | PRODUCTION | |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Can't find the software or driver you need?
Request a Driver/SoftwareHardware Ecosystem
| Parts | Product Life Cycle | Description |
|---|---|---|
| Hot Swap Controllers 1 | ||
| LTC4364 | RECOMMENDED FOR NEW DESIGNS | Surge Stopper with Ideal Diode |
| Parts | Product Life Cycle | Description |
|---|---|---|
|
LT8610A LT8610AB |
42V, 3.5A Synchronous Step-Down Regulator with 2.5μA Quiescent Current |
Tools & Simulations
LTspice 1
Models for the following parts are available in LTspice:
- LT8610
- LT8610A
- LT8610AB
- LT8610AC
LTpowerCAD 2
Design tools for the following parts are available in LTpowerCAD:
- LT8610
- LT8610A
- LT8610AB
- LT8610AC
- LT8610AC-1
LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.
LTpowerCAD® is a power supply design program which selects power stage components, provides detailed power efficiency, shows quick loop Bode plot stability and load transient analysis, and can export to LTspice for simulation.