Using the Peripheral Management Unit – Part 2: The Setup
In this next video of the series, take a closer look at how to configure Maxim’s peripheral management unit (PMU). Only three registers – a configuration register, a descriptor address register, and a loop counter – need to be programmed in each channel to setup the PMU. In the next video, “Using the Peripheral Management Unit–Part 3,” we’ll examine each of the PMU descriptors in detail.
Using the Peripheral Management Unit – Part 2: The Setup
In this next video of the series, take a closer look at how to configure Maxim’s peripheral management unit (PMU). Only three registers – a configuration register, a descriptor address register, and a loop counter – need to be programmed in each channel to setup the PMU. In the next video, “Using the Peripheral Management Unit–Part 3,” we’ll examine each of the PMU descriptors in detail.
{{modalTitle}}
{{modalDescription}}
{{dropdownTitle}}
- {{defaultSelectedText}} {{#each projectNames}}
- {{name}} {{/each}} {{#if newProjectText}}
-
{{newProjectText}}
{{/if}}
{{newProjectTitle}}
{{projectNameErrorText}}