MAX16056

PRODUCTION

125nA nanoPower Supervisory Circuits with Capacitor-Adjustable Reset and Watchdog Timeouts

Capacitor-Adjustable Nanopower Supervisory Circuits

Data Sheet (Rev. 7) Product Selection Table
Viewing:

Overview

  • Reduced Power Requirements
    • Ultra-Low 125nA (typ) Supply Current
    • 1.1V to 5.5V Operating Supply Range
  • Configurable Circuit Enables Flexible Designs
    • Factory-Set Reset Threshold Options from 1.575V to 4.625V in Approximately 100mV Increments
    • Capacitor-Adjustable Reset Timeout
    • Capacitor-Adjustable Watchdog Timeout (MAX16056/MAX16058)
    • Watchdog Timer Capacitor Open Detect Function
    • Optional Watchdog Disable Function (MAX16056/MAX16058)
    • Manual-Reset Input
    • Push-Pull or Open-Drain Active-Low RESET Output Options
  • Integrated Features Increases System Robustness
    • Power-Supply Transient Immunity
    • Guaranteed Active-Low RESET Valid for VCC ≥ 1.1V
  • Saves Board Space
    • 3mm x 3mm TDFN Package
  • Enables Functional Safety at System Level

The MAX16056–MAX16059 are ultra-low-current 125nA (typ) microprocessor (µP) supervisory circuits that monitor a single system supply voltage. These devices assert an active-low reset signal whenever the VCC supply voltage drops below the factory trimmed reset threshold, manual reset is pulled low, or the watchdog timer runs out (MAX16056/MAX16058). The reset output remains asserted for an adjustable reset timeout period after VCC rises above the reset threshold. Factory-trimmed reset threshold voltages are offered from 1.575V to 4.625V in approximately 100mV increments (see Table 1 in the full data sheet).

These devices feature adjustable reset and watchdog timeout using external capacitors. The MAX16056/MAX16058 contain a watchdog timer with a watchdog select input (WDS) that multiplies the watchdog timeout period by 128. The MAX16057/MAX16059 do not have the watchdog feature.

The MAX16056–MAX16059 are available in either push-pull or open-drain output-type configurations (see the Ordering Information in the full data sheet). These devices are fully specified over the -40°C to +125°C automotive temperature range. The MAX16056/MAX16058 are available in the 8-pin TDFN package, and the MAX16057/MAX16059 are available in the 6-pin TDFN package.

Applications

  • Glucose Monitors/Patient Monitors
  • Metering/HVAC
  • MP3 Players/Pagers
  • PDAs/Cell Phones
  • Portable/Battery-Powered Equipment
MAX16056
125nA nanoPower Supervisory Circuits with Capacitor-Adjustable Reset and Watchdog Timeouts
MAX16056, MAX16057, MAX16058, MAX16059: Typical Operating Circuit
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Technical Articles 2

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Latest Discussions

No discussions on MAX16056 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed