MAX14913
warning : NOT RECOMMENDED FOR NEW DESIGNS
searchIcon
cartIcon

MAX14913

Octal High-Speed, High-Side Switch/Push-Pull Driver

Show More showmore-icon

Industry's Most Robust and Fastest 24V Driver, Capable of 200kHz Switching Rate, Improves Factory Throughput

warning : NOT RECOMMENDED FOR NEW DESIGNS tooltip
warning : NOT RECOMMENDED FOR NEW DESIGNS tooltip
Viewing: Part Details
arrow-icon

Not the part you were looking for?

viewall Go to Product Selection Table
Features
  • Low Power and Heat Dissipation
    • 230mΩ (max) High-Side RON at TA = 125°C
    • High-Efficiency 5V/100mA Buck Regulator
  • Fast Switching Ideal for High-Speed Control Systems
    • 0.1µs (typ.) Propagation Delay (High-Side Mode)
    • 0.5µs (typ.) Propagation Delay (Push-Pull Mode)
    • 200kHz Switching-Rate Capability in Push-Pull Mode
    • Fast Inductive Load Demagnetization
  • Robust Operation
    • 60V Abs Max VDD Rating
    • Safe-Demagnetization with Maxim Integrated's patented SafeDemag™: Turn-Off of Unlimited Inductance
    • IEC61000-4-2 12kV Air Gap/8kV Contact ESD Protection
    • ±1kV/42Ω Surge Protection with TVS on VDD
    • Robust SPI Interface with Watchdog and CRC
    • -40°C to +125°C Ambient Operating Temperature Range
  • Extensive Diagnostics Reduces System Downtime
    • Per Driver and Chip Thermal Shutdown
    • Open-Wire Detection in High-Side Mode
    • Low Supply Voltage Warning
    • Undervoltage Detection
    • Overvoltage Detection on OUT
    • Overcurrent Detection
    • LED Drivers for Visual Fault and Output State Indication
  • Flexible Interface for Ease of Design
    • Serial and/or Parallel Control Interface
    • Per-Channel Configuration and Monitoring
    • Wide Logic Voltage Range (1.6V to 5.5V)
  • Small Package and High Integration Enables Compact High-Density I/O Modules
    • 56-Pin QFN 8mm x 8mm Package
    • Eight High-Side Switches/Push-Pull Drivers
    • Daisy-Chainable SPI Interface
Additional Details
show more Icon

The MAX14912/MAX14913 have eight 640mA smart high-side switches that can also be configured as push-pull drivers for high-speed switching. The propagation delay from input to switching of the high-side/low-side drivers is 1µs (max). Each high-side driver has a low on-resistance of 230mΩ (max) at 500mA load current at TA = 125°C.

The device is configured and controlled either through pins or the SPI interface. The SPI interface is daisy-chainable, which allows efficient cascading of multiple devices. SPI also supports command mode, for the highest detailed diagnostic information. The MAX14912 allows configuration through SPI in parallel and serial setting modes, while the MAX14913 only supports configuration through SPI in serial setting mode.

Open-load detection in high-side mode detects both open-wire conditions in the switch on/off states, and LED drivers provide indication of per-channel fault and status conditions. Internal active clamps accelerate the shutdown of inductive loads fast in high-side mode.

The MAX14912/MAX14913 are available in a 56-pin QFN 8mm x 8mm package.

Applications

  • Building Automation
  • Industrial Digital Outputs
  • PLC Systems
Show More Arrow image
modal bookmark icon

{{modalTitle}}

modal close icon

{{modalDescription}}

{{dropdownTitle}}

input down arrow
  • {{defaultSelectedText}}
    • {{#each projectNames}}
  • {{name}}
    • {{/each}} {{#if newProjectText}}
  • plus icon {{newProjectText}}
    • {{/if}}
{{#if toggleButtonDescription}}
{{toggleButtonDescription}}
{{/if}} {{#if newProjectTitle}}

{{newProjectTitle}}

{{projectNameErrorText}}

{{/if}}

MAX14913

Documentation

6
overlayclose

Filters

1 Applied

mobileoverlaydownarrow
  • All
    TickIcon
  • Data Sheet
  • Reliability Data
  • Technical Articles
  • Design Note
  • All
    TickIcon
  • English
  • Japanese
  • Chinese
resetfilter

Reset Filters

Data Sheet

1

PDF Vector

PDF

UPDATED 03/04/2022
English

MAX14912-MAX14913: Octal High-Speed, High-Side Switch/Push-Pull Driver Data Sheet (Rev.7)

Open PDF File

redirect
573.00K
download

Download PDF

Reliability Data

1

PDF Vector

PDF

UPDATED 01/12/2023
English
MAX14913 Reliability Data redirect icon

116.21K

download

Download PDF

Technical Articles

2

PDF Vector

HTML

UPDATED 01/04/2017
English
Switching Inductive Loads With Safe Demagnetization redirect icon

PDF Vector

HTML

UPDATED 01/04/2017
Japanese
誘導性負荷のスイッチングに 安全な消磁機能を適用する redirect icon

Design Note

2

PDF Vector

HTML

UPDATED 03/13/2017
English
Digital Output Drivers: Understanding Key Features and Challenges redirect icon

PDF Vector

HTML

UPDATED 08/15/2017
Chinese
数字输出驱动器：理解关键特性与挑战 redirect icon

There are no results matching this criteria. Try resetting your filters or searching for a different term

close icon

Software & Part Ecosystem

Parts Product Life Cycle Description

Digital I/O1
MAX14900E
popup image
Cart

PRODUCTION

Octal, High-Speed, Industrial, High-Side Switch

Evaluation Kits 3

reference details image

MAX14912EVKIT

Evaluation Kit for the MAX14912 and MAX14913

zoom

MAX14912EVKIT

Evaluation Kit for the MAX14912 and MAX14913

download icon

Download

 print icon

Print
MAX14912EVKIT
Evaluation Kit for the MAX14912 and MAX14913

Features and Benefits

  • Robust Operation with Wide Range of Input Voltages and Load Conditions
  • SPI Interface with up to 20MHz Clock Rate
  • Parallel Interface with up to 200kHz Switching Rate
  • Manual Control in Parallel Mode
  • Wide Logic Voltage Range
  • -40°C to +125°C Temperature Range
  • On-Board LED Indication of Status and Fault Conditions
  • Daisy-Chain Capability
  • Reverse-Voltage Protection
  • Proven PCB Layout
  • Fully Assembled and Tested
  • Windows 7, Windows 8 and Windows 10 Compatible Software
Buy Now View Details

Product Detail

The MAX14912/MAX14913 evaluation kit (EV kit) provides a proven design to evaluate the MAX14912 or MAX14913 octal digital output driver. The EV kit includes an evaluation board and a graphical user interface (GUI) that provides communication from a PC to the target device through a USB port.

The EV kit includes Windows 7, Windows 8 and Windows 10 compatible software for exercising the features of the IC. The EV kit GUI allows controlling the MAX14912/MAX14913 in either Parallel Mode or Serial (SPI) Mode. The EV kit must be powered from an external +24V power supply and can consume up to 10A when fully loaded.

The MAX14912EVKIT/MAX14913EVKIT comes with a MAX14912AKN+, or MAX14913AKN+ installed in a 56-pin, 8 x 8mm TQFN-EP package.

Applications

  • Building Automation
  • Industrial Digital Outputs
  • PLC Systems

Resources

pdf icon

ZIP

MAX14912EVKIT Gerber File - Design Files Download

6.03M

Show More Arrow image
reference details image

MAX14913EVKIT

Evaluation Kit for the MAX14912 and MAX14913

zoom

MAX14913EVKIT

Evaluation Kit for the MAX14912 and MAX14913

download icon

Download

 print icon

Print
MAX14913EVKIT
Evaluation Kit for the MAX14912 and MAX14913

Features and Benefits

  • Robust Operation with Wide Range of Input Voltages and Load Conditions
  • SPI Interface with up to 20MHz Clock Rate
  • Parallel Interface with up to 200kHz Switching Rate
  • Manual Control in Parallel Mode
  • Wide Logic Voltage Range
  • -40°C to +125°C Temperature Range
  • On-Board LED Indication of Status and Fault Conditions
  • Daisy-Chain Capability
  • Reverse-Voltage Protection
  • Proven PCB Layout
  • Fully Assembled and Tested
  • Windows 7, Windows 8 and Windows 10 Compatible Software
Buy Now View Details

Product Detail

The MAX14912/MAX14913 evaluation kit (EV kit) provides a proven design to evaluate the MAX14912 or MAX14913 octal digital output driver. The EV kit includes an evaluation board and a graphical user interface (GUI) that provides communication from a PC to the target device through a USB port.

The EV kit includes Windows 7, Windows 8 and Windows 10 compatible software for exercising the features of the IC. The EV kit GUI allows controlling the MAX14912/MAX14913 in either Parallel Mode or Serial (SPI) Mode. The EV kit must be powered from an external +24V power supply and can consume up to 10A when fully loaded.

The MAX14912EVKIT/MAX14913EVKIT comes with a MAX14912AKN+, or MAX14913AKN+ installed in a 56-pin, 8 x 8mm TQFN-EP package.

Applications

  • Building Automation
  • Industrial Digital Outputs
  • PLC Systems

Resources

pdf icon

ZIP

MAX14913EVKIT Gerber File - Design Files Download

6.03M

Show More Arrow image
reference details image

MAX14912PMB

Evaluation Kit for the MAX14912

zoom

MAX14912PMB

Evaluation Kit for the MAX14912

download icon

Download

 print icon

Print
MAX14912PMB
Evaluation Kit for the MAX14912

Features and Benefits

  • Easy Evaluation of the MAX14912
  • High speed Push-Pull Digital Output
  • High Side Switch option featuring Safe-Demagnetization for Safe Turn Off of Unlimited Inductance
  • Works with USB2PMB2# or USB2GPIO# Adapter and Munich GUI Software
Buy Now View Details

Product Detail

The MAX14912 peripheral module (MAX14912PMB) provides the hardware to evaluate the MAX14912 octal digital output driver. Refer to the MAX14912 IC data sheet for detailed information regarding operation of the IC.

The module can be used in various ways; Maxim sells a low-cost USB2PMB1#, USB2PMB2#, or USB2GPIO# adapter board that uses the Munich GUI software for communication through a USB cable. This is not included with this board. Alternatively, any microcontroller or FPGA with a 12-pin Pmod™-compatible connector can be used. Another option for the user is to wire-wrap a temporary connection from their system to the pins on connector X1.

The Pmod PCB dimension is just 50mm long x 20mm wide, with the width determined by the size of the X3 connector.

Evaluation Kits3

evaluation kit item images

MAX14912EVKIT

Evaluation Kit for the MAX14912 and MAX14913
evaluation kit item images

MAX14913EVKIT

Evaluation Kit for the MAX14912 and MAX14913
evaluation kit item images

MAX14912PMB

Evaluation Kit for the MAX14912

Recently Viewed

Part Details
Documentation
Software & Part Ecosystem
Evaluation Kit
Latest Discussions