alert : Obsolete


Current Mode PWM Controller

Show More showmore-icon

alert : Obsolete tooltip
alert : Obsolete tooltip
Part Details
  • OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.
  • Automatic Feed-Forward Compensation
  • Programmable Pulse-by-Pulse Current Limiting
  • ±1% Bandgap Reference
  • Undervoltage Lockout
  • External Shutdown
  • Dual 200mA Totem Pole Outputs
  • Double Pulse Suppression
  • Soft-Start Capability
  • Direct Replacement for UC1846, UC1847
Additional Details
show more Icon

OBSOLETE: For Information Purposes Only. Contact Analog Devices for Potential Replacement.

The LT1846 family of control ICs contains all necessary circuitry to implement fixed frequency, fixed output voltage, current mode control schemes. Current mode control loops are easy to design and compensate, and provide superior transient line regulation, inherent pulse-by-pulse current limiting, and automatic symmetry correction for push-pull converters. In addition, the LT1846 has built-in undervoltage lockout with hysteresis to prevent oscillations near the threshold, soft-start capability, and can be shut down instantaneously by an external logic level. Internal logic prevents double-pulsing and output overlap.

The oscillator circuitry of the LT1846 allows the user to adjust output deadtime as well as frequency and also provides a bidirectional sync pin to allow paralleling power modules.

Both the internal error amplifier and current sense amplifiers operate over a wide common-mode range to allow design flexibility. The dual outputs provide active pull up/pull down, ideal for driving bipolar or FET switches. The internal reference regulator provides excellent stability for changes in line, load, and temperature. The LT1846 outputs are low in the off state while the LT1847 outputs are high in the off state.


  • Switching Power Supplies
  • Motor Speed Control
  • Power Converters

close icon
Software and Part Ecosystem

Software and Part Ecosystem

Recently Viewed