ADP2147: Compact, 800 mA, 3 MHz, Simple DVS, Buck Regulator Data Sheet (Rev. A)5/26/2011548 kB
Features and Benefits
- Input voltage: 2.3 V to 5.5 V
- Peak efficiency: 95%
- 3 MHz fixed frequency operation
- Low quiescent current: 23 μA
- Ultralow shutdown current: 0.2 μA (typical)
- VSEL pin for simple dynamic voltage scaling (DVS)
- 100% duty cycle low dropout mode
- Internal synchronous rectifier, compensation, and soft start
- Current overload and thermal shutdown protection
- Small, 6-ball, 1 mm × 1.5 mm WLCSP package
The ADP2147 is a high efficiency, low quiescent current, step-down (buck) dc-to-dc regulator with an output voltage that can be switched between two different settings under the control of a select pin. The total solution requires only three tiny external components.
The buck regulator automatically switches operating modes, depending on the load current level, to maximize efficiency. At high output loads, the buck regulator operates in PWM mode. When the load current falls below a predefined threshold, the regulator operates in power save mode (PSM), improving the light-load efficiency.
The ADP2147 runs on input voltages of 2.3 V to 5.5 V, which allows for single lithium or lithium polymer cells, multiple alkaline or NiMH cells, PCMCIA, USB, and other standard power sources. The maximum load current of 800 mA is achievable across the input voltage range.
The ADP2147 is available with fixed output voltages from 0.8 V to 3.3 V. All versions include an internal power switch and synchronous rectifier for minimal external part count and high efficiency. The ADP2147 has an internal soft start and is internally compensated. During logic controlled shutdown, the input is disconnected from the output, and the ADP2147 draws less than 0.2 μA (typical) from the power source.
Other key features include undervoltage lockout to prevent deep battery discharge and soft start to prevent input current overshoot at startup. The ADP2147 is available in a 6-ball WLCSP.
- PDAs and palmtop computers
- Wireless handsets
- Digital audio portable media players
- Digital cameras, GPS navigation units
- Low power portable medical equipment
Product Lifecycle Recommended for New Designs
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
Evaluation Kits (1)
The ADP2147 is a high efficiency, low quiescent current, synchronous, step-down, dc-to-dc converter.
The 3 MHz switching frequency minimizes the size of external components.
Documentation & Resources
UG-270: Evaluation Board for the 800 mA, 3 MHz Buck Regulator6/6/2011190 kB
When the Supply Voltage Is Dynamic3/1/2020
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.View our quality and reliability program and certifications for more information.
|Part Number||Material Declaration||Reliability Data||Pin/Package Drawing||CAD Symbols, Footprints & 3D Models|
|ADP2147ACBZ-110-R7||Material Declaration||Reliability Data||6-Ball WLCSP (1.5mm x 1mm)|
|ADP2147ACBZ-130-R7||Material Declaration||Reliability Data||6-Ball WLCSP (1.5mm x 1mm)|
|ADP2147ACBZ-150-R7||Material Declaration||Reliability Data||6-Ball WLCSP (1.5mm x 1mm)|
|ADP2147ACBZ-170-R7||Material Declaration||Reliability Data||6-Ball WLCSP (1.5mm x 1mm)|
|Wafer Fabrication Data|
Select a model from the dropdown below to subscribe to PCN/PDN notifications and view past notifications as well.
Support & Discussions
Sample & Buy
See our Ordering FAQs for answers to questions about online orders, payment options and more.
Buy Now Pricing
(**) Displayed Buy Now Price and Price Range is based on small quantity orders.
(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Please see the latest communication from our CCO regarding lead times.
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Pricing displayed is based on 1-piece.
Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.