LTC3407-2

PRODUCTION

Dual Synchronous, 800mA, 2.25MHz Step-Down DC/DC Regulator

Viewing:

Overview

  • High Efficiency: Up to 95%
  • Very Low Quiescent Current: Only 40µA
  • 2.25MHz Constant Frequency Operation
  • High Switch Current: 1.2A on Each Channel
  • No Schottky Diodes Required
  • Low RDS(ON) Internal Switches: 0.35Ω
  • Current Mode Operation for Excellent Line and Load Transient Response
  • Short-Circuit Protected
  • Low Dropout Operation: 100% Duty Cycle
  • Ultralow Shutdown Current: IQ < 1µA
  • Output Voltages from 5V down to 0.6V
  • Power-On Reset Output
  • Externally Synchronizable Oscillator
  • Small Thermally Enhanced MSOP and 3mm × 3mm DFN Packages
  • AEC-Q100 Qualified for Automotive Applications

The LTC3407-2 is a dual, constant frequency, synchronous step down DC/DC converter. Intended for low power applications, it operates from 2.5V to 5.5V input voltage range and has a constant 2.25MHz switching frequency, allowing the use of tiny, low cost capacitors and inductors with a profile ≤1.2mm. Each output voltage is adjustable from 0.6V to 5V. Internal synchronous 0.35Ω, 1.2A power switches provide high efficiency without the need for external Schottky diodes.

A user selectable mode input is provided to allow the user to trade-off noise ripple for low power efficiency. Burst Mode® operation provides high efficiency at light loads, while Pulse Skip Mode provides low noise ripple at light loads.

To further maximize battery life, the P-channel MOSFETs are turned on continuously in dropout (100% duty cycle), and both channels draw a total quiescent current of only 40µA. In shutdown, the device draws <1µA.

IOUT FSW Features
LTC3407 2x 600mA 1.5MHz
LTC3407-2 2x 800mA 2.25MHz
LTC3407-3 2x 800mA 2.25MHz Fixed 1.8V/3.3V
LTC3407-4 2x 800mA 2.25MHz Reduce POR Delay
LTC3407A 2x 600mA 1.5MHz Low Ripple Burst Mode
LTC3407A-2 2x 800mA 2.25MHz Low Ripple Burst Mode

Applications

  • PDAs/Palmtop PCs
  • Digital Cameras
  • Cellular Phones
  • Portable Media Players
  • PC Cards
  • Wireless and DSL Modems

LTC3407-2
Dual Synchronous, 800mA, 2.25MHz Step-Down DC/DC Regulator
LTC3407-2 Application Circuit LTC3407-2 Pin Configuration LTC3407-2 Pin Configuration LTC3407-2 Performance Graph
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
LTC3407A-2 PRODUCTION Dual Synchronous 800mA, 2.25MHz Step-Down DC/DC Regulator
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice 1


Models for the following parts are available in LTspice:

  • LTC3407
  • LTC3407-2
  • LTC3407-3
  • LTC3407-4
  • LTC3407A
  • LTC3407A-2

LTpowerCAD 1


Design tools for the following parts are available in LTpowerCAD:

  • LTC3407
  • LTC3407-2
  • LTC3407-3
  • LTC3407-4
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

LTpowerCAD

LTpowerCAD® is a power supply design program which selects power stage components, provides detailed power efficiency, shows quick loop Bode plot stability and load transient analysis, and can export to LTspice for simulation.


Evaluation Kits

eval board
DC734A

LTC3407-2EDD Demo Board | 2.5V ≤ VIN ≤ 5.5V, VOUT1 = 1.2V/1.5V/1.8V @ 800mA, VOUT2 = 2.5V @ 800mA

Product Details

Demonstration circuit 734 is a Dual Synchronous, 800mA, 2.25MHz Step-Down DC/DC Regulator featuring the LTC3407-2. The DC734 has an input voltage range of 2.5V to 5.5V, and both outputs are capable of delivering up to 800mA of output current. VOUT1 has a jumper-selectable output voltage that can be set to 1.2V, 1.5V or 1.8V. VOUT2 is fixed at 2.5V.


 


DC734A
LTC3407-2EDD Demo Board | 2.5V ≤ VIN ≤ 5.5V, VOUT1 = 1.2V/1.5V/1.8V @ 800mA, VOUT2 = 2.5V @ 800mA
DC734A - Schematic

Latest Discussions

No discussions on LTC3407-2 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed