LTC1385

PRODUCTION

3.3V Low Power EIA/TIA-562 Transceiver

Data Sheet Product Selection Table
Viewing:

Overview

  • Operates from a Single 3.3V Supply
  • Low Supply Current: ICC = 200µA
  • ICC = 35µA in Driver Disable Mode
  • ICC = 0.2µA in Shutdown Mode
  • ESD Protection Over ±10kV
  • Uses Small Capacitors: 0.1µF
  • Operates to 120kBaud
  • Output Overvoltage Does Not Force Current Back into Supplies
  • EIA/TIA-562 I/O Lines Can Be Forced to ±25V Without Damage
  • Pin Compatible with LT 1180A

The LTC1385 is an ultra-low power, 2-driver/2-receiver EIA / TIA-562 transceiver which operates from a single 3.3V supply. The charge pump requires only four spacesaving 0.1µF capacitors.

The transceiver operates in one of three modes: Normal, Driver Disable or Shutdown. In the Normal mode, ICC is only 200µA in the unloaded condition. In the Driver Disable mode, the charge pump is turned off, the driver outputs are forced into three-state, both receivers are kept active, and ICC drops to 35µA. In the Shutdown mode, everything is turned off and ICC drops to 0.2µA.

The LTC1385 is fully compliant with all data rate and overvoltage EIA/ TIA-562 specifications. The transceiver can operate up to 120kbaud with a 1000pF, 3kΩ load. Both driver outputs and receiver inputs can be forced to ±25V without damage, and can survive multiple ±10kV ESD strikes.

Applications

  • Notebook Computers
  • Palmtop Computers
LTC1385
3.3V Low Power EIA/TIA-562 Transceiver
2-Drivers/2-Receivers with Shutdown and Driver Disable Quiescent and Shutdown Supply Current vs Temperature Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Hardware Ecosystem

Parts Product Life Cycle Description
Interface Transceivers & Isolators 1
LTM2882
PRODUCTION Dual Isolated RS232 μModule Transceiver + Power
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Latest Discussions

1 Years Ago
Interceptor Request
2 Years Ago
Interceptor list Creation
2 Years Ago
Interceptor List : Request
View related discussion on EngineerZone®

Recently Viewed