LT1110

PRODUCTION

Micropower DC-DC Converter Adjustable and Fixed 5V, 12V

Data Sheet Product Selection Table
Viewing:

Overview

  • Operates at Supply Voltages From 1.0V to 30V
  • Works in Step-Up or Step-Down Mode
  • Only Three External Off-the-Shelf Components Required
  • Low-Battery Detector Comparator On-Chip
  • User-Adjustable Current Limit
  • Internal 1A Power Switch
  • Fixed or Adjustable Output Voltage Versions
  • Space-Saving 8-Pin MiniDIP or S8 Package

The LT1110 is a versatile micropower DC-DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. The very low minimum supply voltage of 1.0V allows the use of the LT1110 in applications where the primary power source is a single cell. An on-chip auxiliary gain block can function as a low battery detector or linear post regulator.

The 70kHz oscillator allows the use of surface mount inductors and capacitors in many applications. Quiescent current is just 300µA, making the device ideal in remote or battery powered applications where current consumption must be kept to a minimum.

The device can easily be configured as a step-up or step-down converter, although for most step-down applications or input sources greater than 3V, the LT1111 is recommended. Switch current limiting is user-adjustable by adding a single external resistor. Unique reverse battery protection circuitry limits reverse current to safe, non-destructive levels at reverse supply voltages up to 1.6V.

Applications

  • Pagers
  • Cameras
  • Single-Cell to 5V Converters
  • Battery Backup Supplies
  • Laptop and Palmtop Computers
  • Cellular Telephones
  • Portable Instruments
  • Laser Diode Drivers
  • Hand-Held Inventory Computers
LT1110
Micropower DC-DC Converter Adjustable and Fixed 5V, 12V
All Surface Mount Single Cell to 5V Converter Efficiency Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Application Note 2

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

LTspice

Models for the following parts are available in LTspice:

  • LT1110
  • LT1110-12
  • LT1110-5
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Latest Discussions

No discussions on LT1110 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed