Complex Problem. Simple Solution.
A better design experience. A more dynamic automotive experience. ADI's A2B® technology delivers both.
Latest Resources
Design Notes Page
- Dual-Channel, 8.5 A, 18 V, Synchronous Step-Down Silent Switcher Device with 16 µA Quiescent Current
- 4-Switch Buck-Boost Controller with Pass-Thru Capability Eliminates Switching Noise
- All-in-One Power Solution for Automotive Infotainment—Single IC Produces Five Rails Directly from Battery
- Triple Bucks Plus a Boost Controller to Meet Tough Requirements of Wide Range VIN Automotive Applications
- High Efficiency Synchronous SEPIC for Automotive and Industrial Installations
Data Sheets
Product Selector Card
Application Notes
- EE-402: Synchronous System Halt and Run on the ADSP-CM41x Processor (Rev. 1) PDF
- EE-392: Estimating Power for ADSP-SC58x/2158x SHARC+ Processors (Rev. 1) PDF
- EE-386: Using the Security Packet Engine to Protect Data (Rev. 1) PDF
- AN-1419: Using the ADUX1020 for Gesture Recognition (Rev. 0) PDF
- EE-366: Secure Booting Guide for Blackfin+® and SHARC+® Processors (Rev. 2) PDF
Technical Articles Page
- Bipolar, Bidirectional DC-to-DC Supply Sources and Sinks Current from 5 V to 24 V Input
- From ADAS to Driver Replacement—Is Actual Radar Performance Good Enough?
- Automotive Camera Link Technology Challenges and Solutions
- Radar, the Car’s Virtual Eye
- New IC Eases the Design of 48 V/12 V Dual Battery Automotive Systems
- LIDAR Perception Challenges
- A2B and Ethernet in Automotive Applications: What, When, and How
- The Wearable for Machine Health: Condition-Based Monitoring
- The Autonomous Industrial Revolution
- Battery Stack Monitor Maximizes Performance of Li-Ion Batteries in Hybrid and Electric Vehicles
- Driver Assistance to Driver Replacement: The Cognitive Vehicle Is Built Upon Foundational, High Integrity Sensor Data
- Future of Mobility
- C2B: A New Car Camera Link for Automotive Applications
- Passing the Radiated Emissions Test: How to Eliminate Complex EMI Mitigation Techniques for Compact and Cost-Effective Isolated Designs
- Communications Equipment Makers Demand High Power Outputs and Small Solution Footprints
- Self-Driving Cars—Are Power Systems up to the Task?
- Supply Clean Power with Ultralow Noise LDO Regulators
- Avoiding the Hidden Costs of Isolation Design—How to Manage Project Risk with Next-Generation Solutions
- Automotive Digital Isolators
Technical Articles
Product Highlight
Product Selection Guide
White Papers
Evaluation Documentation
Solutions Bulletins & Brochures
Webcast
- What Really Drives Your Electric Vehicle (EV)?
- A2B: A Better Audio Design Experience
- Silent Switcher Regulators: High Efficiency with Ultralow EMI
- Knocking Down the Barriers to Autonomous Driving
- Automotive Camera Connectivity using C2B Technology
- The Hidden Cost of Your Isolated System Design
- Understanding Power System Management
- Explaining Phase Noise
- Overcoming Challenges in GaN Power Amplifier Implementations
- Signal Chain Optimization for IoT Applications
- Sensors and How to Use Them
- Using On-Off Keying, Digital Isolators in Harsh Environments
- Isolation Architectures for Motor Control Systems
- How to Read a Datasheet
Videos
- Analog Devices @ CES 2020 Recap Highlight
- Test, Build & Harness the 5G Future
- Automotive USB-C Power Delivery Buck-Boost Converters
- High Power A2B Enables Emerging In-Cabin Audio Video Applications
- Achieving EV Range, Safety and Performance Begins with Analog
- Race to Autonomy: Enabling Trusted Navigation & Reliable Perception
- Advanced In-Cabin Sensing and Innovative Personalized UX
- Anti-spoofing Face ID using ADI Time-of-Flight Technology
- Consumer Healthcare Monitoring Solution Enabled by ADI’s ToF
- Analog Devices Imaging RADAR on Nvidia DRIVE AGX Xavier
- Drive360 Imaging RADAR for a Safe Autonomous Experience
- Total Managed Power with Digital Power System Management
- High Power, High Density Switched Capacitor & Hybrid Converter
- LTC33XX, 5V Family of Synchronous Step-Down Silent Switchers
- µModule® Complete System-in-Package Power Management Solutions
- Bidirectional DC-to-DC Ideal for Power Redundancy and Backup
- Advanced Modular DC/DC Regulators in High-Density Systems
- The Benefits of Digital Power System Management
- Bi-Directional Synchronous 4-Switch Buck-Boost Converter
- Watch the World of Analog Devices at electronica 2018
- µModule® Power Products by Analog Devices
- Introducing the LTM4626 and LTM4638, µModules®
- Introducing the LTM4686 Ultrathin Dual 10A µModule® Regulator
- Introducing ADI's 4th Generation µModule® Regulators
- Silent Switcher 2nd-Generation Demonstration
- How to Meet EMI Targets with Simplified Compact Isolated Design
- Introducing Power by Linear
- Strong Man (ADXL372 for MEMS)
- Silent Switcher II
- Analog Devices Trusted Sensor Solutions: Secure IoT Stack
- Complete 24GHz to 44GHz Radio using SiGe and 28nm CMOS
- miRadar 8: 24GHz FMCW MIMO Radar Platform by Sakura Tech
- High Integration SiGe Solutions For Freq. Generation & Conversion
- High Dynamic Range Image Sensing & Contextual Awareness
- Analog Devices Connect: Cloud Platform
- 24 GHz Radar Technology Enables Next Generation Sensors
- A²B Audio Bus and Network
- A2B-Connected, Next Generation Car Radio
- High Performance 76-81GHz 28nm RF CMOS Automotive RADAR
- Introducing Drive360 Autonomous Driving Solutions
- Optical Gesture Control and Presence Detection
- TMR Position and Current Sensing in Motor Control Applications
- Isolation of Things: iCoupler® Digital Isolators vs. Optocouplers
- AMR Position and Current Sensing in Motor Control Applications
- Contactless Angle Position Sensing using AMR Technology
- MEMS Accelerometers for Smart Infrastructure
- 24GHz Multi-channel Radar and Sensor Solution at IMS 2016
- Analog Devices' Material Sensing Solution for Everyone, Anywhere
- Increase Performance While Reducing Size with RF PLLs
- ADIsimPLL: Creating a custom voltage-controlled oscillator (VCO)
- Dual Independent Core Safety Concept for Power Conversion
- ADI Material Sensing Using SCiO Spectroscopy
- Automotive Audio Bus (A²B) Enables Efficient In-Car Communications
- SHARC ADSP-SC5xx System Test using the A²B Bus Analyzer
- In-Vehicle Active Noise Cancellation
- Internet Connectivity via the Automotive Audio Bus (A²B)
- Distributed Audio using the Automotive Audio Bus (A²B)
- Automotive Audio Bus (A2B)
- Use Circuits from the Lab™ in Your Next Design
- Automotive Safety Systems and the AD8283 Radar AFE
Press Release
- Analog Devices Collaborates with Hyundai Motor Company to Launch Industry’s First All-Digital Road Noise Cancellation System
- Rimac Chooses Analog Devices to Enable Precision Battery Management in High Performance Electric Vehicles
- Analog Devices and First Sensor Developing LIDAR Offerings to Accelerate the Future of Autonomous Driving
- Analog Devices Unveils SHARC® Audio Module Platform for Rapid Audio DSP Project Development
- BYD Selects Analog Devices’ Audio Bus and Processor Technologies to Improve Vehicle Energy Efficiency and Enhance Infotainment Experience
- 40VIN, 1.2A, 4mm × 4mm × 1.82mm Silent Switcher µModule Regulator Fits into Tighter PCB Spaces
- 60V, Dual, 2-Phase Boost Controller Can Cascade Outputs to Regulate Beyond 200V
- 98% Efficient Bidirectional Buck-Boost Controller for 12V-12V Redundant Battery Systems in Autonomous Vehicles
- ±0.5% Accurate Supervisors Target Very Low Voltage Components
- 3.2MHz, Automotive Grade Quad 1A Step-Down Regulators + LDO Reduces Footprint & EMI
- High Efficiency N-Channel Switching Surge Stopper Protects Against 150V Transients
- 60V Low IQ Buck Controller Plus 4-Channel 8A Configurable Buck DC/DCs
- Analog Devices Joins University of Michigan’s Mcity Initiative for Advancing Connected and Autonomous Vehicles
- Analog Devices’ Next Generation Digital Signal Processors Provide Greater Internal Program and Data Memory for Automotive Audio Applications
- Analog Devices and Renesas Electronics Collaborate on 77/79-GHz Automotive RADAR Technology to Improve ADAS Applications and Enable Autonomous Vehicles
- Analog Devices’ Expanded Series of A2B Transceivers Significantly Improves Bus-bandwidth Utilization
- Analog Devices Acquires Laser Beam Steering Technology from Vescent Photonics to Enable Mainstream Adoption of Automotive LIDAR Systems
- Integrated Accelerometer/Gyro Combo Series from Analog Devices Helps Improve Reliability and Accuracy of Automotive Safety Systems
- Ford Motor Company Selects Analog Devices’ Automotive Audio Bus™ for its Next-Generation Infotainment Systems
- Analog Devices 4-Channel, 24-GHz Receiver Downconverter Delivers Industry’s Best Noise and Power Performance in Space-Saving Package
Analog Dialogue
- Add an Efficient Positive Rail to a Unipolar Negative Supply
- Leveraging the On-Chip FIR and IIR Hardware Accelerators on a Digital Signal Processor
- Contactless Fluid-Level Measurement Using a Reflectometer Chip
- Protecting and Powering Automotive Electronics Systems with No Switching Noise and 99.9% Efficiency
- Dual AMR Motor Position Sensor for Safety Critical Applications
- Comprehensive Power Supply System Designs for Harsh Automotive Environments Consume Minimal Space, Preserve Battery Charge, Feature Low EMI
- Overcoming Constraints: Design a Precision Bipolar Power Supply on a Simple Buck Controller
- Automotive USB Type-C Power Solution: 45 W, 2 MHz Buck-Boost Controller in a 1 Inch Square
- Automotive Radar Sensors and Congested Radio Spectrum: An Urban Electronic Battlefield?
- Single, 2 MHz Buck-Boost Controller Drives Entire LED Headlight Cluster Meets CISPR 25 Class 5 EMI
- Vehicle Tracking Systems: Anytime, Anywhere, Anyhow
- Designing for Low Noise Feedback Control with MEMS Gyroscopes
- The Basics of MEMS IMU/Gyroscope Alignment
- An Introduction to MEMS Vibration Monitoring
- Reduced Integration Time Improves Accuracy in Dead Reckoning Navigation Systems
- Convert a Buck Regulator into a Smart LED Driver, Including Dimming
- Front-End Amplifier and RC Filter Design for a Precision SAR Analog-to-Digital Converter
- Compensating Amplifiers That Are Stable at Gain ≥ 10 to Operate at Lower Gains
- Making Batteries Last Longer with Fast, High-Precision SAR Analog-to-Digital-Converters
- Diagnostic Technique Detects Open and Short Circuits in Wiring Harnesses
- Optimize High-Current Sensing Accuracy by Improving Pad Layout of Low-Value Shunt Resistors
- High-Temperature Electronics Pose Design and Reliability Challenges
- System Demonstration Platform Facilitates Quick Prototyping and Evaluation
- AD7879 Controller Enables Gesture Recognition on Resistive Touch Screens
- Ask The Applications Engineer—40: Switch and Multiplexer Design Considerations for Hostile Environments
- Minimizing Noise and Power Consumption in Automotive Audio Systems with SigmaDSP
- Cyclic Redundancy Checking Ensures Correct Data Communications
- Low Dropout Regulators—Why the Choice of Bypass Capacitor Matters
- Electromagnetic Interference (EMI) Filtering Reduces Errors in Precision Analog Applications
- Automobile Tail Lamp and Brake Lamp Controller
- Isolation in High-Voltage Battery Monitoring for Transportation Applications
- Digital Isolator Simplifies USB Isolation in Medical and Industrial Applications
- Accelerometers—Fantasy & Reality
- Low-Cost Video Multiplexing Using High-Speed Amplifiers
- Fingerprint Sensor and Blackfin Processor Enhance Biometric-Identification Equipment Design
- Current Measurement in Solenoids for Automotive Control Systems
- Use of Video Technology to Improve Automotive Safety Becomes More Feasible with Blackfin™ Processors
- A Useful Role for the ADXL202 Dual-Axis Accelerometer in Speedometer-Independent Car-Navigation Systems
- Single-supply In-amp for Automotive Applications
- Phase Accumulator for Direct Digital Synthesis Resolves to Within 0.7 Hz
- Automotive Sensor Detects Lamp and Indicator Failures Automatically
Informational
English
简体中文
日本語
Руccкий
