MAX32010

LAST TIME BUY

25V Span, 1.2A Device Power Supply (DPS)

Flexible Current Configuration up to 1.2A Device Power Supply for Industrial Test and Instrumentation Applications

Data Sheet (Rev. 0) Product Selection Table

Part Models: 2
1ku List Price: Starting From $30.61

Viewing:

Overview

Programmability for Multiple ATE Applications
- Programmable Current and Voltage Compliance
- Programmable Current Ranges
  - ±200µA
  - ±2mA
  - ±20mA
  - ±200mA
- External Buffer Supports Higher Currents with up to 16 Parallel Devices
- Programmable Gain Allows a Wide Range of DACs
High Accuracy and Flexible Control for Optimal Performance
- Load Regulation of 1mV at 1200mA
- Programmable Compensation for Wide Range of Loads
- Range Change Glitch Control
- Integrated Window Comparator for Go/No-Go Testing
- External Test Mode Enables I_DDQ Measurement with Reprogramming
- 3-Wire, 20MHz SPI Interface
Integrated Protection for Robustness
- Thermal Warning Flag and Thermal Shutdown
- Short-Circuit Protection
Compact 14mm x 14mm, 100-Pin TQFP Package

The MAX32010 provides all the key features of a device power supply (DPS) common to automatic test equipment (ATE) and other instrumentation. Its small size, high level of integration, and superb flexibility make the MAX32010 ideal and economical for multisite systems requiring many device power supplies.

The MAX32010 has multiple input control voltages that allow independent setting of the output voltage and voltage/current limits. The MAX32010 is a voltage source when the load current is between the two programmed limits, and it transitions gracefully into a precision current source/sink if a programmed current limit is reached. The output features two independently adjustable voltage clamps that limit both the negative and positive output voltage.

The MAX32010 can source voltages spanning 25V and can source currents as high as ±1200mA. The DPS can support an external buffer for sourcing and sinking higher currents. Multiple MAX32010s can be configured in parallel to load-share, allowing higher output currents with greater flexibility. The MAX32010 features operation over a wide range of load conditions. Programmability allows optimizing of settling time, over-/undershoot, and stability. Configurable range-change glitch control circuit minimizes output transients during range transitions.

The MAX32010 offers load regulation of 1mV at 1200mA load and is available in a 100-pin TQFP package with an exposed pad on the top for heat removal.

Applications

Industrial Systems
Memory Testers
Programmable Power Supplies
System-on-a-Chip Testers
VLSI Testers

Part Models: 2
1ku List Price: Starting From $30.61

Documentation

Data Sheet 1

MAX32010: 25V Span, 1.2A Device Power Supply (DPS) Data Sheet (Rev.0) 01/04/2021

Design Note 1

Designing Device Power Supply ICs in an Application-Specific Automated Test Equipment System 08/20/2021

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
MAX32010CCQ+	100-TQFP_EP-14X14X1.0	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
MAX32010CCQ+T	100-TQFP_EP-14X14X1.0	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys

This is the most up-to-date revision of the Data Sheet.

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

Software Development 1

Software GUI MAX32010EVKIT, 1.0.0

Evaluation Kits

Evaluation Kit for the MAX32010

Buy Now View Details

Features and Benefits

Easy Evaluation of the MAX32010 EV kit

On-Board Voltage Reference (MAX6126)
On-Board DACs for Level Setting
On-Board ADC for Measurements
On-Board Regulators Generate All the Required Voltages from ±12V
USB Interface
Headers for External SPI and DACs Proven PCB Layout
Proven PCB Layout
Includes Heatsink and Fan
Fully Assembled and Tested

Product Details

The MAX32010 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB) design that evaluates the functionality of device power supply (DPS) IC MAX32010, which has 25V span output voltage and programmable current ranges up to 1.2A.

The MAX32010 EV kit contains a microcontroller (MCU) that translates between the SPI interface and USB to allow the user to configure internal registers and modes with graphical user interface (GUI) software running on a PC. The EV kit includes Windows^® 0-compatible software that provides a simple GUI for configuration of all the MAX32010 registers through SPI. The EV kit is fully assembled and tested at the factory.

This document provides a list of equipment required to evaluate the device, a straightforward test procedure to verify functionality, a description of the EV kit circuit, component list, circuit schematic, and artwork for each layer of the PCB. The MAX32010 EV kit PCB comes with a MAX32010DCCQ+ installed.