TMCM-100

OBSOLETE PRODUCT

产品技术资料帮助

ADI公司所提供的资料均视为准确、可靠。但本公司不为用户在应用过程中侵犯任何专利权或第三方权利承担任何责任。技术指标的修改不再另行通知。本公司既没有含蓄的允许，也不允许借用ADI公司的专利或专利权的名义。本文出现的商标和注册商标所有权分别属于相应的公司。
Viewing:

概述

Main Features

  • Controls 2-phase and 3-phase stepper motors with 8-Bit microstepping
  • Controls 5-phase stepper motors in fullstep mode
  • Supports standard motor driver ICs (e.g. TMC236 or TMC239)
  • TMC453 high performance motion controller
  • CAN 2.0b Interface with Transceiver
  • Interface options
    • Analog outputs for up to 8-bit microstepping via integrated DACs
    • Step/direction output
    • Step/direction input
    • Digital outputs to drive 2-5 phase stepper motors in full- and halfstep-mode
  • RS-232 Interface (without level shifter)
  • RS-485 Interface (without transceiver)
  • Trinamic Motion Control Language (TMCL) integrated
  • In-system programmable microcontroller
  • 16 KByte EEPROM to store TMCL programs of up to 2048 commands
  • Automatic S-shaped and trapazoid ramps
  • Incremental encoder interface
  • Automatic stall and out-of-step correction function
  • Smart multi-level current control to keep driver and motor cool
  • Limit and reference switch inputs
  • Single 5 VDC Supply
  • Compact size: TMCM Standard Format 80x50 mm2

The TMCM-100 is a one axis high performance closed loop stepper motor controller module for external power drivers. The external driver can be attached via the classical analog interface or via the step & direction interface. With its very small size it is dedicated to embedded applications. The board can be connected to a baseboard or customized electronics with a pin connector. The TMCM-100 comes with the PC based software development environment TMCL-IDE for the ADI Trinamic Motion Control Language (TMCL). Using predefined TMCL high level commands like "move to position" or "constant rotation", rapid and fast development of motion control applications is guaranteed. The TMCM-100 can be controlled via the serial UART interface (e.g. using a RS-232 or RS-485 level shifter) or via CAN. Communication traffic is kept very low since all time critical operations, e.g. ramp calculation, are performed on board. The TMCL program can be stored in the on board EEPROM for stand-alone operation. The firmware of the module can be updated via the serial interface.

TMCM-100
OBSOLETE PRODUCT
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

创建新项目
提问

参考资料

用户手册 1

了解更多
添加至 myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

创建新项目

最新评论

需要发起讨论吗？ 没有关于 TMCM-100的相关讨论？是否需要发起讨论？

在EngineerZone®上发起讨论

近期浏览