LTC7000A

RECOMMENDED FOR NEW DESIGNS

Fast 150V Protected High Side NMOS Static Switch Driver

Viewing:

Overview

  • Wide Operating VIN: 3.5V to 135V (150V Abs Max)
  • 1Ω Pull-Down, 2.2Ω Pull-Up for Fast Turn-On and Turn-Off Times with 35ns Propagation Delays
  • Internal Charge Pump for 100% Duty Cycle
  • Short-Circuit Protected
  • Adjustable Current Trip Threshold (LTC7000A)
  • Current Monitor Output (LTC7000A)
  • Automatic Restart Timer
  • Open-Drain Fault Flag
  • Adjustable Turn-On Slew Rate
  • Gate Driver Supply from 3.5V to 15V
  • Adjustable VIN Undervoltage and Overvoltage Lockouts (LTC7000A)
  • Adjustable Driver Supply VCC Undervoltage Lockout
  • Low Shutdown Current: 1μA
  • CMOS Compatible Input
  • Thermally Enhanced, High Voltage Capable 16-Lead MSOP Packages
  • AEC-Q100 Qualified for Automotive Applications

The LTC7000A/LTC7000A-1 is a fast high side N-channel MOSFET gate driver that operates from input voltages up to 135V. It contains an internal charge pump that fully enhances an external N-channel MOSFET switch, allowing it to remain on indefinitely.

Its powerful driver can easily drive large gate capacitances with very short transition times, making it well suited for both high frequency switching applications or static switch applications that require a fast turn-on and/or turn-off time.

When an internal comparator senses that the switch current has exceeded a preset level, a fault flag is asserted and the switch is turned off after a period of time set by an external timing capacitor. After a cooldown period, the LTC7000A/LTC7000A-1 automatically retries.

The LTC7000A/LTC7000A-1 is available in the thermally enhanced 16-lead MSOP packages.

APPLICATIONS

  • Static Switch Driver
  • Load and Supply Switch Driver
  • Electronic Valve Driver
  • High Frequency High Side Gate Driver

LTC7000A
Fast 150V Protected High Side NMOS Static Switch Driver
LTC7000A Application Circuit LTC7000A Performance Graph LTC7000A Pin Configuration LTC7000A Pin Configuration
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

LTspice


Models for the following parts are available in LTspice:

  • LTC7000
  • LTC7000-1
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Latest Discussions

Recently Viewed