ADIN1320
PRE-RELEASERobust, Industrial, Low Latency and Low Power 10/100/1000 Mbps Ethernet PHY with Copper and Fiber Interface
- Part Models
- 2
- 1ku List Price
- price unavailable
Overview
- 1 Gb Ethernet PHY IEEE 802.3 compliant
- Support Copper and Fiber Interface
- 10BASE-T/100BASE-TX/1000BASE-T
- 100BASE-FX/1000BASE-X, and 1000BASE-KX
- Media converter mode between Copper and Fiber
- Bridge mode between RGMII and SGMII
- MII, RMII, RGMII, and SGMII MAC interfaces
- Low latency performance
- 1000BASE-T RGMII latency transmit <70 ns, receive <230 ns
- 100BASE-TX MII latency transmit <55 ns, receive <250 ns
- Wake-on-LAN (WoL)
- EEE in accordance with IEEE 802.3az
- EMC tests standards
- IEC 61000-4-5 surge
- IEC 61000-4-4 electrical fast transient (EFT)
- IEC 61000-4-2 ESD
- IEC 61000-4-6 conducted immunity
- IEC 61000-4-3 radiated immunity
- EN55032 radiated and conducted emissions
- Unmanaged configuration using multilevel pin strapping
- MDIO/MDC management interface and interrupt pin
- Start of packet detection for IEEE 1588 time stamp support
- Enhanced link detection
- Voltage mode MDI drivers, eliminates termination resistors
- Automatic polarity and pair swap correction
- Cable diagnostics (TDR and signal analysis)
- Frame generator and checker, multiple loopback modes
- 3 × Configurable LEDs
- 48-lead, 7 mm × 7 mm LFCSP small package, at −40°C to +105°C ambient operation
- Low power consumption
- 91.5 mW for 1000BASE-X
- 336.5 mW for 1000BASE-T
- 3.3 V/2.5 V/1.8 V MDIO and MAC interface VDDIO supply
- Integrated power supply monitoring and POR
The ADIN1320 is a low-power, single-port Gigabit Ethernet transceiver that supports copper, fiber, and backplane Ethernet connectivity. Its key features include low latency and energy-efficient operation, making it an excellent choice for a wide range of industrial Ethernet applications where performance and power efficiency are critical.
It integrates a high‑performance Energy Efficient Ethernet (EEE) PHY core along with a robust SerDes subsystem, enabling operation over 10BASE‑T, 100BASE‑TX, 1000BASE‑T, 100BASE‑FX, 1000BASE‑X, and 1000BASE‑KX physical layers. The device supports multiple MAC‑side interfaces including SGMII, RGMII, RMII, and MII; and enables a variety of operating modes such as SGMII/RGMII/RMII/MII to Copper, RGMII/RMII/MII to Fiber, RGMII/ RMII/MII to copper‑or‑fiber automatic media selection Copper to Fiber media conversion, and SGMII to RGMII bridging. This versatility allows the ADIN1320 to function as a copper PHY, fiber PHY, mixed‑media PHY, media converter, or MAC‑interface bridge depending on system requirements.
The MII management interface (MDIO) provides a 2-wire serial connection between a host processor or MAC and the ADIN1320, enabling access to control and status registers within the PHY Core, SerDes subsystem, and GE subsystem. It supports both IEEE 802.3 Clause 22 and Clause 45 frame structures, ensuring compatibility with a wide range of Ethernet controllers and systems.
Please see the Data Sheet for the full description.
APPLICATIONS
- Energy Distribution and Energy Automation
- Robotics/Motion Control
- Factory Automation and Industrial Automation
- Test and measurement
Documentation
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| ADIN1320CCPZ | 48-Lead LFCSP (7mm x 7mm x 0.75mm) | ||
| ADIN1320CCPZ-R7 | 48-Lead LFCSP (7mm x 7mm x 0.75mm) |
This is the most up-to-date revision of the Data Sheet.
Tools & Simulations
LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.
Latest Discussions
No discussions on ADIN1320 yet. Have something to say?
Start a Discussion on EngineerZone®