ADATE320

RECOMMENDED FOR NEW DESIGNS

1.25 GHz Dual Integrated DCL with PPMU, Level Setting DACs, and On-Chip Calibration Registers

Data Sheet (Rev. E) Product Selection Table

Part Models: 2
1ku List Price: Starting From $67.68

Viewing:

Overview

1.25 GHz, 2.5 Gbps data rate
3-level driver with high-Z and reflection clamps
Window and differential comparators
±25 mA active load
Per pin parametric measurement unit (PMU) with a −1.5 V to +4.5 V range
Low leakage mode (typically <5 nA)
Integrated 16-bit DACs with offset and gain correction
1.2 W power dissipation per channel (ADATE320)
1.3 W power dissipation per channel (ADATE320-1)
Driver
- Voltage range: −1.5 V to +4.5 V
- Precision trimmed termination: 50.0 Ω
- Unterminated swing: 50 mV minimum to 6.0 V maximum
- 400 ps minimum pulse width, 1.0 V programmed swing
- 25 ps deterministic jitter

Comparator
- Differential and single-ended window modes
- 100 ps equivalent input rise/fall time (ERT/EFT)
- 250 mV current mode logic (CML) outputs (ADATE320)
- 400 mV CML outputs (ADATE320-1)
Load
Per pin PMU (PPMU)
- Force voltage/compliance range: −1.5 V to +4.5 V
- 5 current ranges
  - ±40 mA, ±1 mA, ±100 μA, ±10 μA, ±2 μA
- Dedicated go/no-go comparators
DC levels
- Fully integrated and dedicated 16-bit DACs
- On-chip gain and offset calibration registers with automatic add/multiply function
84-lead, 10 mm × 10 mm LFCSP (0.4 mm pitch)

The ADATE320 is a complete, single-chip ATE solution that performs the pin electronics functions of a driver, comparator, and active load (DCL), and a four quadrant per pin parametric measurement unit (PPMU). Dedicated 16-bit digital-to-analog converters (DACs) with on-chip calibration registers provide all the necessary dc levels for operation of the device.

The driver features three active modes: high, low, and terminate, as well as a high impedance inhibit state. The inhibit state, in conjunction with the integrated dynamic clamps, facilitates significant attenuation of transmission line reflections when the driver is not actively terminating the line. The open-circuit drive capability is −1.5 V to +4.5 V to accommodate a standard range of ATE and instrumentation applications.

The ADATE320 can be used as a dual, single-ended pin electronics channel or as a single differential channel. In addition to per channel high speed window comparators, the ADATE320 provides a programmable threshold differential comparator for differential ATE applications.

All dc levels for DCL and PPMU functions are generated by dedicated, on-chip, 16-bit DACs. To facilitate the programming of accurate levels, the ADATE320 includes an integrated calibration function to correct for the gain and offset errors of each functional block. Correction coefficients can be stored on chip, and any values written to the DACs adjust automatically using the appropriate correction factors.

The ADATE320 uses a serial programmable interface (SPI) bus to program all functional blocks, DACs, and on-chip calibration constants. It also has an on-chip temperature sensor and overvolt-age/undervoltage fault clamps that monitor and report the device temperature and any output pin or transient PPMU voltage faults that may occur during operation.

The ADATE320 is available in two options. The standard option has high speed comparator outputs with 250 mV output swing. The ADATE320-1 has 400 mV output swing. See the Ordering Guide in the data sheet for more information.

Applications

Automatic test equipment (ATE)
Semiconductor/board test systems
Instrumentation and characterization equipment

Part Models: 2
1ku List Price: Starting From $67.68

Documentation

Data Sheet 1

ADATE320: 1.25 GHz Dual Integrated DCL with PPMU, Level Setting DACs, and On-Chip Calibration Registers Data Sheet (Rev.E) 05/07/2024

User Guide 1

UG-2115: Evaluating the ADATE320 1.25 GHz Dual Integrated DCL with PPMU, Level Setting DACs, and On-Chip Calibration Registers (Rev.0) 07/24/2023

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
ADATE320-1KCPZ	84-Lead LFCSP (10mm x 10mm w/ EP)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADATE320KCPZ	84-Lead LFCSP (10mm x 10mm w/ EP)	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

Jun 26, 2023 - 23_0025 Package Outline Drawing and Data Sheet Revision for Select LFCSP Products in Amkor
		PCN23_0025_Form Material_Report Package Outline Drawing Qualification Results Summary
ADATE320-1KCPZ	PRODUCTION
ADATE320KCPZ	PRODUCTION

This is the most up-to-date revision of the Data Sheet.

Tools & Simulations

IBIS Model 1

ADATE320 IBIS Model

Evaluation Kits

Evaluating the ADATE320 1.25 GHz Dual Integrated DCL with PPMU, Level Setting DACs, and On-Chip Calibration Registers

Buy Now View Details

Features and Benefits

Full feature evaluation board for the ADATE320
Supply voltages: +12 V and −8 V on-board voltage regulators
Signal input and output breakout through SMA connectors
Differential pairs provided with 50 Ω-controlled impedance traces with equal lengths
LED indicators for read and write data
PC software for control through USB

Product Details

The EVAL-ADATE320EBZ is a full-featured evaluation board designed to allow the user to simply evaluate all features of the ADATE320 dual-integrated driver, comparator, and active load (DCL) with a per pin parametric measurement unit (PPMU). The EVAL-ADATE320EBZ features breakout connections through the Subminiature Version A (SMA) terminals for all of the signal inputs and outputs. The differential pairs are provided with 50 Ω-controlled impedance traces with equal lengths.

The EVAL-ADATE320EBZ only takes in +12 V and −8 V supplies, and the on-board regulators provide the required device supplies. The EVAL-ADATE320EBZ can be controlled through the on-board connectors or through the USB port of a Windows-based PC using the ADATE320 Evaluation Board Software, which is available for download on the EVAL-ADATE320EBZ product page. The default setup is for control through the USB port. Communication with the ADATE320 Evaluation Software is through the USB, and the light emitting diode (LED) indicators on the EVAL-ADATE320EBZ provide displays for the read and write data.

The ADATE320 data sheet provides full details on the ADATE320, as well as the information on each of the registers within the ADATE320, and must be consulted when using the EVALADATE320EBZ.