The ADM1166 Super Sequencer® is a configurable supervisory/ sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple-supply systems. In addition to these functions, the ADM1166 integrates a 12-bit ADC and six 8-bit voltage output DACs. These circuits can be used to implement a closed-loop margining system that enables supply adjustment by altering either the feedback node or reference of a dc-to-dc converter using the DAC outputs.
Supply margining can be performed with a minimum of external components. The margining loop can be used for in-circuit testing of a board during production (for example, to verify board func-tionality at −5% of nominal supplies), or it can be used dynamically to accurately control the output voltage of a dc-to-dc converter.APPLICATIONS
|Title||Content Type||File Type|
|ADM1166: Super Sequencer with Margining Control, and Non-Volatile Fault Recording (Rev 0, 12/2010) (pdf, 3483 kB)||Data Sheets|
|AN-1009: Block Erasing, Reading and Writing to the ADM106x EEPROM (pdf, 63 kB)||Application Notes|
AN-1086: Using an ADM106x in a Hot Swap Application
(PDF, 59 kB)
Describes the design considerations that must be taken into account when the input supplies to the ADM106x come up when a card is hot swapped in a live, powered backplane.
|AN-0997: Ping-Pong Configuration Guide for ADM1062 to ADM1069 Devices (pdf, 172 kB)||Application Notes|
|AN-1001: Checksum Calculations (pdf, 76 kB)||Application Notes|
|AN-897: ADC Readback Code (pdf, 65 kB)||Application Notes|
|AN-0973: Erasing and Programming the Sequencing Engine EEPROM (pdf, 61 kB)||Application Notes|
|AN-0975: Automatic Generation of State Diagrams for the ADM1062 to ADM1069 Using Graphviz (pdf, 209 kB)||Application Notes|
|AN-722: Watchdog Detection Using the ADM106x (pdf, 179 kB)||Application Notes|
|AN-698: Configuration Registers of ADM1062/ADM1063/ADM1064/ADM1065/ADM1066/ADM1067/ADM1166 (pdf, 561 kB)||Application Notes|
|AN-782: Monitoring High Voltages with the ADM1062-ADM1069 Super Sequencers (pdf, 61 kB)||Application Notes|
|AN-781: Monitoring Additional Supplies with the ADM1062-ADM1069 Super Sequencers (pdf, 96 kB)||Application Notes|
|AN-780: Monitoring Negative Voltages with the ADM1062 to ADM1069 Super Sequencers (pdf, 98 kB)||Application Notes|
|AN-723: Interrupt Generation Using the ADM106x (pdf, 262 kB)||Application Notes|
UG-404: USB-SDP-CABLEZ Serial Interface Board
(pdf, 536 kB)
The USB-SDP-CABLEZ is primarily used to communicate with certain Analog Devices evaluation boards.
|RAQs index||Rarely Asked Questions||HTML|
|Glossary of EE Terms||Glossary||HTML|
|Title||Content Type||File Type|
Requires the ADMxxxx Common Run-time to be installed in order to provide driver support for the USB-SMBUS-CABLEZ and USB-SDP-CABLEZ interface connectors. If there are previous versions of this software (v4.0.6 or earlier), or the ADM1175-7 & ADM1191-92 software (v3.0.1 or earlier) installed they should be removed prior to installing the common run-time.
ADMxxxx Common Run-Time
This run-time installer is shared between the SuperSequencer, ADM1175-92 and ADM1293/4 and the Hot Swap and Power Monitor tools. Contains driver support for the USB-SMBUS-CABLEZ and USB-SDP-CABLEZ interface connectors.
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.