ADP1190

PRODUCTION

Integrated 500mA Load Switch with Quad Signal Switch

Viewing:

Overview

  • Low input voltage range:
    1.4 V to 3.6 V
  • Power Switch: Low RDSON of 160 mΩ at 1.8 V, with Active Discharge
  • SPST NO Signal Switches (4) :
    RDSON of 2 Ω at 1.8 V with active pull down on one side
  • 500 mA continuous operating current
  • Built-in level shift for control logic that can be operated by 1.2V logic
  • Ultralow shutdown current: < 0.7 μA
  • Ultrasmall 1.2 mm × 1.6mm × 0.6mm, 12-ball, 0.4 mm pitch WLCSP

The ADP1190 is an integrated high-side load switch with 4 signal switches designed for operation from 1.4 V to 3.6 V. This load switch provides power domain isolation for extended power battery life. The load switch is a low on-resistance P-channel MOSFET that supports up to 500 mA of continuous load current and minimizes power loss. Integrated with the load switch are 4 normally open two Ohm SPST signal switches.

Beyond operating performance, the ADP1190 occupies minimal printed circuit board (PCB) space with an area less than 1.92 mm2 and a height of 0.60 mm. The ADP1190 is available in an ultrasmall 1.2 mm × 1.6 mm, 12-ball, 0.4 mm pitch WLCSP.

APPLICATIONS

  • Mobile phones
  • SIM Card Disconnect switch
  • Digital cameras and audio devices
  • Portable and battery-powered equipment

ADP1190
Integrated 500mA Load Switch with Quad Signal Switch
ADP1190 Functional Block Diagram ADP1190 Pin Configuration
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Latest Discussions

No discussions on ADP1190 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed