content here.
content here.

AD7667:  16-Bit, 1 MSPS PulSAR® Unipolar ADC with Ref

The AD7667 is a 16-bit, 1 MSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. The part contains a high-speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both serial and parallel system interface ports.

It features a very high sampling rate mode (Warp) and, for asynchronous ...More

AD7667:  16-Bit, 1 MSPS PulSAR® Unipolar ADC with Ref

Product Description

The AD7667 is a 16-bit, 1 MSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. The part contains a high-speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both serial and parallel system interface ports.

It features a very high sampling rate mode (Warp) and, for asynchronous conversion rate applications, a fast mode (Normal) and, for low power applications, a reduced power mode (Impulse) where the power is scaled with the throughput. .

It is fabricated using Analog Devices’ high-performance, 0.6 micron CMOS process, with correspondingly low cost and is available in a 48-lead LQFP and a tiny 48-lead LFCSP with operation specified from –40°C to +85°C. .

Applications

  • Data Acquisition
  • Instrumentation
  • Digital Signal Processing
  • Spectrum Analysis
  • Medical Instruments
  • Battery-Powered Systems
  • Process Control

    • RESOURCES & TOOLS

    What is your task? Try Lead the Way AdvisorTM BETA
    • 2.5 V Internal Reference: Typical Drift 3 ppm/ºC
    • Throughput:
      1 MSPS (Warp Mode)
      800 kSPS (Normal Mode)
      666 kSPS (Impulse Mode)
    • INL: ±2.5 LSB Max (±0.0038% of Full Scale)
    • 16 Bits Resolution with No Missing Codes
    • S/(N+D): 88 dB max @ 20 kHz; THD: -96 dB max @ 20 kHz
    • Analog Input Voltage Range: 0 V to 2.5 V
    • No Pipeline Delay
    • Parallel and Serial 5 V/3 V Interface
    • SPI®/QSPI™/MICROWIRE™/DSP Compatible
    • Single 5 V Supply Operation
    • Power Dissipation:
      87 mW typ @ 666 kSPS, 130 µW @ 1 kSPS without REF
      133 mW typ @1 MSPS with REF
    • Package:
      48-Lead Quad Flat Pack (LQFP)
      48-Lead Chip Scale Package (LFCSP)
      Pin-to-Pin Compatible with PulSAR™ ADCs
    • Resolution (Bits): 16bit
    • T-Put Rate: 1MSPS
    • # Chan: 1
    • Supply V: Single(+5)
    • Pwr Diss: 145mW
    • Interface: Par,Ser,SPI
    • Ain Range: (Vref) p-p,2.5V p-p,Uni (Vref),Uni 2.5V
    • SNR (dB): 89.2dB
    • Pkg Type: CSP,QFP

    Functional Block Diagram for AD7667

    AD7667 Diagram
    Functional Block Diagram for AD7667

    Similar Products

    arrow View Full Interactive Product Selection Table
    Part# Bits Throughput Rate # of Inputs Operating Pwr Diss
    AD7983 16 1.33MSPS 1 12mW
    AD7621 16 3MSPS 1 86mW
    AD7622 16 2MSPS 1 85mW
    AD7623 16 1.33MSPS 1 55mW
    AD7625 16 6MSPS 1 145mW
    AD7653 16 1MSPS 1 145mW
    AD7401 16 20MSPS 1 100mW
    AD7667 16 1MSPS 1 145mW
    AD7671 16 1MSPS 1 125mW
    AD7677 16 1MSPS 1 130mW
    AD7401A 16 20MSPS 1 105mW
    AD7400 16 10MSPS 1 90mW
    AD7980 16 1MSPS 1 10mW
    AD7400A 16 10MSPS 1 95mW
    back to top

    Pricing, Packaging & Availability

    Print Table
    back to top
    back to top
    back to top

    Help

    Model
    The model number is a specific version of a generic that can be purchased or sampled.

    Status
    Status indicates the current lifecycle of the product. This can be one of 4 stages:
    • Pre-Release: The model has not been released to general production, but samples may be available.
    • Production: The model is currently being produced, and generally available for purchase and sampling.
    • Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
    • Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).
    Package Description
    The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

    For detailed drawings and chemical composition please consult our  Package Site

    Pin Count
    Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

    Temperature Range
    This is the acceptable operating range of the device. The various ranges specified are as follows:
    • Commercial: 0 to +70 degrees Celsius
    • Military : -55 to +125 degrees Celsius
    • Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
    • Automotive: -40 to +125 degrees Celsius
    Price
    The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

    Production Availability
    This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.
    Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

    RoHS Compliant
    Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.

    View PCN
    This is the list of Product Change Notifications (PCN) published on the web for this model. Click on the link to access PCN Information.Only select pre-2009 PCN�s are available on-line. To obtain a pre-2009 PCN, contact your ADI Sales Rep. For more information on ADI's PCN process, please visit our PCN Policy Statement page

    *The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
    **Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.