ADP1147

Obsolete

High Efficiency Step-Down Switching Regulator Controllers

Data Sheet (Rev. A) Product Selection Table

Viewing:

Overview

Greater Than 95% Efficiency
Shutdown Pin
Current Mode Switching Architecture Provides Superior Load and Line Transient Response
Low Dropout Voltage
Low Standby Current 160 µA typ

Wide Input Voltage Range 3.5 V* to 16 V
Low Cost
User Defined Current Limit
Available in 8-Lead PDIP
or 8-Lead SOIC
Short Circuit Protection

The ADP1147 is part of a family of High Efficiency Step-Down Switching Regulators. These regulators offer superior load and line transient response, a user defined current limit and an automatic power savings mode. The automatic power savings mode is used to maintain efficiency at lower output currents. The ADP1147 incorporates a constant off-time, current mode switching architecture to drive an external P-channel MOSFET at frequencies up to 250 kHz. Constant off-time switching erates a constant ripple current in the external inductor. This results in a wider input voltage operating range of 3.5 V* to 16 V, and a less complex circuit design.

*3.5 volt operation is for the ADP1147-3.3.