Персональная электроника

The ADSD3100 is a CMOS 3D Time of Flight (ToF)-based 3D depth and 2D visual light imager that is available for integration into 3D sensor systems. The functional blocks required for read out, which include an analog to digital converter (ADC), pixel biasing circuitry, and sensor control logic, are built into the chip to enable a cost effective and simple implementation into systems.

The ADSD3100 interfaces electrically to a host system over a mobile industry processor interface (MIPI), Camera Serial Interface 2 (CSI-2) interface. A lens plus optical band-pass filter for the imager and an infrared light source plus an associated driver are required to complete the working subsystem.

APPLICATIONS

• Smartphones
• Augmented reality (AR)/virtual reality (VR)
• Machine vision systems (logistics and inventory)
• Robotics (consumer and industrial)

The LT8390A is a synchronous 4-switch buck-boost DC/DC controller that regulates output voltage, input or output current from an input voltage above, below, or equal to the output voltage. The proprietary peak-buck peak-boost current mode control scheme allows adjustable and synchronizable 600kHz to 2MHz fixed frequency operation, or internal 25% triangle spread spectrum frequency modulation for low EMI. With a 4V to 60V input voltage range, 0V to 60V output voltage capability, and seamless low-noise transitions between operation regions, the LT8390A is ideal for voltage regulator, battery and supercapacitor charger applications in automotive, industrial, telecom, and even battery-powered systems.

The LT8390A provides input or output current monitor and power good flag. Fault protection is also provided to detect output short-circuit condition, during which the LT8390A retries, latches off, or keeps running.

 

	Max Switching Frequency	Max Output Power
LT8390	650kHz	450W+
LT8390A	2MHz	50W+

APPLICATIONS

• Automotive, Industrial, Telecom Systems
• High Frequency Battery-Powered System

The LTC3309B is a very small, high efficiency, low noise, monolithic synchronous 6A step-down DC/DC converter operating from a 2.25V to 5.5V input supply. Using constant frequency, peak current mode control at switching frequencies 3MHz-10MHz and minimum on-time as low as 22ns, this regulator achieves fast transient response with small external components. Silent Switcher architecture minimizes EMI emissions.

The LTC3309B operates in forced continuous or pulse skip mode for low noise, or the low-ripple Burst Mode operation for high efficiency at light loads, ideal for battery-powered systems. The IC regulates output voltages as low as 500mV. Other features include output over-voltage protection, short-circuit protection, thermal shut-down, clock synchronization, and up to 100% duty cycle operation for low dropout. The device is available in a low profile 12-lead 2mm × 2mm × 0.74mm LQFN package with exposed pad for low thermal resistance.

APPLICATIONS

• Optical Networking, Servers, Telecom
• Automotive, Industrial, Communications
• Distributed DC Power Systems (POL)
• FPGA, ASIC, µP Core Supplies

The LT8652S is a dual step-down regulator that delivers up to 8.5A of continuous current from both channels and supports loads up to 12A from each channel. The LT8652S uses second generation Silent Switcher technology including integrated bypass capacitors to deliver a high frequency, high efficiency, small solution with excellent EMI performance. The LT8652S is ideal for noise sensitive applications such as PLLs and high bandwidth data and communications systems.

The fast, clean, low overshoot switching edges enable high efficiency operation even at high switching frequencies, enabling a wide control loop bandwidth for fast transient response. Output current monitoring and limiting allows inductors to be selected for the maximum output current in a given application. Differential output voltage sensing provides accurate voltage regulation at the point of load for high current applications. The two channels can be combined to deliver 17A, and two LT8652S ICs can be combined for a 4-phase, 34A supply.

Applications

• Server Power Applications
• General Purpose Step-Down

The LT8697 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator designed to power 5V USB applications. A precise output voltage and programmable cable drop compensation maintain accurate 5V regulation at the USB socket connected to the end of a long cable. Forced continuous operation allows the LT8697 to sink current, further enhancing accurate 5V regulation during load transients.

Accurate and programmable output current limit, a power good indicator pin and an output current monitor pin improve system reliability and safety, allow the user to implement latch-off or auto-retry functionality and can eliminate the need for a USB switch IC. Dual feedback allows regulation on the output of a USB switch and limits cable drop compensation to a maximum of 5.8V output, protecting USB devices during fault conditions. Thermal shutdown provides additional protection by limiting power dissipation in the IC during an overtemperature fault.

The LT8697 is available in a small 24-lead 3mm × 5mm package with an exposed pad for low thermal resistance.

Applications

• Automotive and Industrial USB
• Precision 5V Supply

TThe SSM3582A is a fully integrated, high efficiency, digital input stereo Class-D audio amplifier. The device can operate from a single supply and requires only a few external components, significantly reducing the circuit bill of materials.

A proprietary, spread spectrum Σ-Δ modulation scheme enables direct connection to the speaker and ensures state-of-the-art analog performance while lowering radiated emissions compared to other Class-D architectures. An optional ultralow electromagnetic interference (EMI) mode significantly reduces radiated emissions above 100 MHz, enabling longer speaker cable lengths. Audio is transmitted digitally to the amplifier, minimizing the possibility of signal corruption in digital environments. The amplifier provides outstanding analog performance, with a 106 dB signal-to-noise ratio and a low 0.004% total harmonic distortion + noise (THD + N).

The SSM3582A operates from a single 4.5 V to 16.5 V supply and is capable of delivering 2× 15 W rms continuously into 8 Ω and 4 Ω loads at <1% total harmonic distortion (THD). The efficient modulation scheme maintains excellent power efficiency over a wide range of impedances: 93.8% into an 8 Ω load and 90.6% into a 4 Ω load. Optimization of the output pulse maintains performance at impedances as low as 3 Ω/5 μH, enabling its use with extended bandwidth tweeters.

The pulse code modulation (PCM) audio serial port supports most common protocols, such as I²S, left justified, and time division multiplexing (TDM), and can address up to 16 devices on a single interface, for up to 32 audio playback channels.

IC operation is controlled through a dedicated I²C interface. The two ADDRx pins (2×, five-level) define up to 16 individual addresses in I²C and standalone modes and automatically set the default TDM slots attribution.

A micropower shutdown mode is triggered by removing the digital audio interface clock, with a typical current of <1 μA. A software power-down mode is also available.

An automatic power-down feature shuts down the amplifier and the digital-to-analog converter (DAC) when no signal is present at the input, minimizing power consumption during digital silence. The device restarts when nonzero data is present at the input. Mute and unmute transitions are pop and click free.

The SSM3582A is specified over the commercial temperature range of −40°C to +85°C. The device has built in thermal shutdown and output short-circuit protection, as well as an early thermal warning with programmable gain limiting to maintain operation.

The SSM3582A is available in a 40-lead, 6 mm × 6 mm lead frame chip scale package (LFCSP), with a thermal pad to improve heat dissipation.

Applications

• Mobile computing
• All in one computers
• Portable electronics
• Wireless speakers
• Televisions

The SSM2375 is a fully integrated, high efficiency, Class-D audio amplifier. It is designed to maximize performance for mobile phone applications. The application circuit requires a minimum of external components and operates from a single 2.5 V to 5.5 V supply. It is capable of delivering 3 W of continuous output power with <1% THD + N driving a 3 Ω load from a 5.0 V supply.

The SSM2375 features a high efficiency, low noise modulation scheme that requires no external LC output filters. The modulation continues to provide high efficiency even at low output power. The SSM2375 operates with 93% efficiency at 1.4 W into 8 Ω or with 85% efficiency at 3 W into 3 Ω from a 5.0 V supply and has an SNR of >100 dB.

Spread-spectrum pulse density modulation (PDM) is used to provide lower EMI-radiated emissions compared with other Class-D architectures. The inherent randomized nature of spread-spectrum PDM eliminates the clock intermodulation (beating effect) of several amplifiers in close proximity.

The SSM2375 includes an optional modulation select pin (ultralow EMI emissions mode) that significantly reduces the radiated emissions at the Class-D outputs, particularly above 100 MHz. In ultralow EMI emissions mode, the SSM2375 can pass FCC Class B radiated emission testing with 50 cm, unshielded speaker cable without any external filtering.

The device also includes a highly flexible gain select pin that allows the user to select a gain of 0 dB, 3 dB, 6 dB, 9 dB, or 12 dB. The gain selection feature improves gain matching between multiple SSM2375 devices within a single application as compared to using external resistors to set the gain.

The SSM2375 has a micropower shutdown mode with a typical shutdown current of 20 nA. Shutdown is enabled by applying a logic low to the SD pin.

The device also includes pop-and-click suppression circuitry. This suppression circuitry minimizes voltage glitches at the output during turn-on and turn-off, reducing audible noise on activation and deactivation.

Other features that simplify system-level integration of the SSM2375 include input low-pass filtering to suppress out-of-band DAC noise interference to the PDM modulator and fixed-input impedance to simplify component selection across multiple platform production builds.

The SSM2375 is specified over the industrial temperature range of −40°C to +85°C. It has built-in thermal shutdown and output short-circuit protection. It is available in a halide-free, 9-ball, 1.5 mm × 1.5 mm wafer level chip scale package (WLCSP).

Applications

• Mobile phones
• MP3 players
• Portable electronics

The SSM2537 is a PDM digital input Class D power amplifier that offers higher performance than existing DAC plus Class D solutions. The SSM2537 is ideal for power sensitive applications where system noise can corrupt the small analog signal sent to the amplifier, such as mobile phones and portable media players.

The SSM2537 combines an audio digital-to-analog converter (DAC), a power amplifier, and a PDM digital interface on a single chip. The integrated DAC plus analog Σ-Δ modulator architecture enables extremely low real-world power consumption from digital audio sources with excellent audio performance. Using the SSM2537, audio can be transmitted digitally to the audio amplifier, significantly reducing the effect of noise sources such as GSM interference or other digital signals on the transmitted audio. The SSM2537 is capable of delivering 2.5 W of continuous output power with <1% THD + N driving a 4 Ω load from a 5.0 V supply.

The SSM2537 features a high efficiency, low noise modulation scheme that requires no external LC output filters. The closed-loop, three-level modulator design retains the benefits of an all-digital amplifier, yet enables very good PSRR and audio performance. The modulation continues to provide high efficiency even at low output power and has an SNR of 103 dB PDM input. Spread-spectrum pulse density modulation is used to provide lower EMI-radiated emissions compared with other Class D architectures.

The SSM2537 has a four-state gain and sample frequency selection pin that can select two different gain settings, optimized for 3.6 V and 5 V operation. This same pin also controls the internal digital filtering and clocking, which can be set for 64 × f_S or 128 × f_S input sample rates to support both 3 MHz and 6 MHz PDM clock rates.

The SSM2537 has a micropower shutdown mode with a typical shutdown current of 1 µA for both power supplies. Shutdown is enabled automatically by gating input clock and data signals. A standby mode can be entered by applying a designated PDM stop condition sequence. The device also includes pop-and-click suppression circuitry. This suppression circuitry minimizes voltage glitches at the output when entering or leaving the low power state, reducing audible noises on activation and deactivation.

The SSM2537 is specified over the industrial temperature range of −40°C to +85°C. It has built-in thermal shutdown and output short-circuit protection. It is available in a 9-ball, 1.3 mm × 1.3 mm wafer level chip scale package (WLCSP).

Applications

• Mobile handsets

SSM3525 – это полностью интегрированный, обладающий высоким КПД монофонический усилитель звуковых частот класса D с цифровым входом и функцией оцифровки выходного напряжения, выходного тока и напряжения питания PV_DD. В типичной схеме применения усилитель требует лишь небольшого количества внешних компонентов и подачи напряжений питания IOV_DD (1.8 В) и PV_DD (от 4.5 В до 17 В). SSM3525 способен выдавать мощность 8.3 Вт в непрерывном режиме в нагрузку 8 Ом (или 15.3 Вт в нагрузку 4 Ом), поддерживая полный уровень гармонических искажений и шума (THD + N) на уровне менее 1% при работе от напряжения питания 12 В, либо 30.2 Вт в нагрузку 4 Ом при работе от напряжения питания 17 В при том же уровне THD + N.

SSM3525 построен на базе обеспечивающей высокий КПД и низкий уровень шума схемы модуляции, которая не требует применения выходных LC-фильтров. Данная схема способна поддерживать высокий КПД даже при низких уровнях выходной мощности. Компонент обеспечивает КПД 92% при мощности 9 Вт на нагрузке 8 Ом, работая от напряжения питания 12 В, и 89% при мощности 20 Вт на нагрузке 4 Ом, работая от напряжения питания 17 В. Отношение сигнал-шум составляет 107 дБ (взвешивание по А-закону).

Модуляция коэффициента заполнения импульсной последовательности (модуляция плотности импульсов) с расширением спектра дает меньший уровень электромагнитных помех по сравнению с другими архитектурами класса D, в особенности, при частотах выше 100 МГц.

Наличие цифрового входа избавляет от необходимости во внешнем цифро-аналоговом преобразователе (ЦАП). SSM3525 имеет режим отключения с очень низким энергопотреблением (типичный ток 90 нА при питании PV_DD = 12 В). Питание блоков измерения можно отключать в индивидуальном порядке, если их функция не требуется.

Компонент также содержит схему подавления щелчков и треска, которая минимизирует выбросы напряжения на выходе при включении и отключении.

Функция измерения тока реализуется при помощи интегрированного аналого-цифрового преобразователя (АЦП) и внутреннего измерительного резистора. Информация об оцифрованных уровнях напряжения и тока может возвращаться в различных форматах последовательной передачи цифрового звука, включая I²S, формат с мультиплексированием во времени (TDM) и модуляцию плотности импульсов (PDM).

В состав SSM3525 входит интегрированный стабилизатор для формирования необходимого напряжения питания аналоговой части, равного 5 В. Компонент также поддерживает работу с внешним напряжением питания 5 В от внешнего преобразователя, использование которого потенциально позволяет повысить КПД системы.

SSM3525 предназначен для работы с интерфейсом управления I²C и имеет гарантированный рабочий температурный диапазон от −40°C до +85°C. Компонент содержит встроенную схему защиты от короткого замыкания по выходу и схему отключения при перегреве. Он выпускается в не содержащем галоидных соединений корпусе WLCSP (wafer-level chip scale package) с 23 шариковыми контактами, имеющем габариты 2.26 мм × 2.38 мм.

Области применения

• Мобильные вычислительные средства
• Портативная электроника

The SSM3515 is a fully integrated, high efficiency, mono Class-D audio amplifier with digital inputs. The application circuit requires a minimum of external components and can operate from a single 4.5 V to 17 V supply. It can deliver 8.4 W of output power into an 8 Ω load or 15.8 W into an 4 Ω load from a 12 V power supply, or 31.3 W into an 4 Ω load from a 17 V power supply, all with 1% THD + N.

The SSM3515 features a high efficiency, low noise modulation scheme that requires no external LC output filters. This scheme provides high efficiency even at low output power. It operates with 92% efficiency at 7 W into an 8 Ω load or 88% efficiency at 15 W into 4 Ω from a 12 V supply.

Spread spectrum pulse density modulation provides lower EMI radiated emissions compared with other Class-D architectures, particularly above 100 MHz.

The digital input eliminates the need for an external digital-to-analog converter (DAC). The SSM3515 has a micropower shutdown mode with a typical shutdown current of 39 nA at the 12 V PVDD supply. The device also includes pop and click suppression circuitry that minimizes voltage glitches at the output during turn on and turn off.

The SSM3515 operates with or without an I2C control interface. The SSM3515 is specified over the commercial temperature range (−40°C to +85°C). It has built in thermal shutdown and output short-circuit protection. It is available in a halide-free, 20-ball, 1.8 mm × 2.2 mm wafer-level chip scale package (WLCSP).

Applications

• Notebooks
• Portable electronics
• Home audio

The SSM6322 is an integrated, dual-channel audio amplifier solution that interfaces directly with audio DAC/CODEC, maximizing the fidelity of high fidelity audio signal chains. The highly efficient design of the SSM6322 delivers outstanding audio performance while minimizing power dissipation for maximum battery life in portable applications.

The SSM6322 features −121 dB THD + N at 1 kHz, along with very low output noise from 20 Hz to 20 kHz. The low power operation, high peak output current, and high PSRR make the SSM6322 an ideal candidate for applications that require high fidelity audio, high dynamic range, precision, and low power. This highly integrated drive solution also reduces development time while reducing board space and minimizing external components.

The SSM6322 is available in a 24-lead LFCSP package. The SSM6322 operates over the industrial temperature of −40°C to +85°C.

Applications

• High fidelity headphone driver
  • Mobile phones
  • Bluetooth speakers & headphones
  • Gaming Notebooks and Tablets
• A/V receivers
• Professional audio equipment
• Audio test equipment
• Automobile infotainment system

AD-96TOF1-EBZ представляет собой надежную аппаратную платформу для определения глубины изображений. В сочетании с процессорной платой из экосистемы 96Boards ее можно использовать для разработки программного обеспечения и алгоритмов трехмерной визуализации. После разработки программного обеспечения и алгоритмов аппаратная часть проекта может быть использована для производства. Analog Devices может порекомендовать сторонних разработчиков, которые могут помочь изменить платформу для удовлетворения индивидуальных потребностей в применении.

В зависимости от предпочтений заказчика и опыта разработки можно использовать различные процессорные платы 96Boards с целью проведения оценки системы и индивидуальной разработки. Для большей универсальности на мезонинной плате доступен интерфейс с Raspberry Pi.

Это решение обеспечивает очень малое энергопотребление при измерении глубины изображения на расстоянии до 6 метров, имеет оптимальные характеристики при измерении как в помещении, так и на открытом воздухе, и разрешение VGA.

Возможные области применения:

• Робототехника
• Промышленная автоматизация
• Оборудование одновременной локализации и построения карты (SLAM)
• Дополненная реальность
• Виртуальная реальность
• БПЛА
• Автомобильные датчики