パワー・マネージメント・ツール

開発を加速する実績のあるパワー・ツリー・ソリューションをご覧ください。そして、特定の電圧レール、負荷、システムの設計要件に適合する主要なパラメータで検索を絞り込みます。

電圧レール、負荷電流、供給経路を定義するインタラクティブなブロック図を用いてパワー・ツリーを構築します。主要なパラメータを定義し、選定された部品を用いたアーキテクチャを比較し、リアルタイム計算を活用します。

電圧レール、負荷電流、供給経路を明確に把握した設計を確定し、効率、電力損失、基板面積などのシステムレベル指標を迅速に最適化します。

Search through filtered solutions customized for design needs, with smart recommendations optimized for design trade-offs and component selection.

Visualize and fine-tune the power schematic, update operating conditions and select components with instant voltage, current, and performance feedback.

Refine and validate design with built-in efficiency and power loss analysis to finalize a high performance solution design.

Ships with Analog Devices models for op amps, power ICs, regulators, converters, etc. Supports generic SPICE models and user-created device models. Also provided is a library of devices for general circuit simulation.

Simulate with confidence using LTspice’s extensive library of Analog Devices power, amplifier, and converter models. Explore real-world performance before building—reducing prototyping costs and time.

Set and adjust voltages, currents, and component choices in software, then validate with modular SCP building blocks for hardware evaluation.

Build, save, and test complete power system setups in LTpowerPlay, whether connected to evaluation hardware or operating in offline simulation mode.

Define, test, and adjust multirail power-up and power-down sequencing logic to ensure reliable startup, safe shutdown, and consistent system operation.

The LTpowerAnalyzer allows the ability to capture and analyze different power supply parameters using only a single hardware setup.

A specialized power lab is not always found a few steps away. The LTpowerAnalyzer is a helpful tool when the use of expensive and bulky bench equipment is not practical or feasible.

The LTpowerAnalyzer kit includes ribbon cables, sockets, and multiple interface boards to make the hardware setup as convenient for the user as possible.