Overview

Features and Benefits

  • Highly Integrated 2-Phase Stepper Motor Driver SoC
    • 4.5V to 65V DC Voltage Range
    • Up to 4.25ARMS and 6AFS Current Capability
    • Integrated 65V H-Bridges with low RDS (ON) (HS + LS): 0.08Ω (typ) (TA = 25°C)
    • Integrated Lossless Current Sensing (ICS)
  • Advanced Motor Control
    • 256-Microsteps
    • StealthChop+, StallGuard+, CoolStep+, µDcStep
    • SpreadCycle, StallGuard2, CoolStep
    • Passive Braking and Freewheeling Modes
  • Flexible Control and Feedback Interfaces
    • SPI for Configuration, Control, and Diagnostics
    • STEP/DIR and Incremental Encoder Interfaces
    • Reference Switch Inputs
  • Integrated Protection and Diagnostics 
    • RT-OCSI

Product Details

The TMC2262-EVKIT includes the TMC2262-EVAL board together with the Eselsbruecke and Landungsbruecke interface boards as part of the ADI Trinamic™ TMCL ecosystem.

The TMC2262 is a smart, high-performance, single-axis 2-phase stepper motor driver IC designed for NEMA 17, NEMA 23, and NEMA 24 stepper motor applications. The TMC2262 features two fully-integrated 65V H-bridges rated for up to 4.25ARMS (6AFS) motor current and lossless integrated current sensing (ICS), eliminating the need for external MOSFETs and current-sense resistors.

Advanced control technologies, including StealthChop+™, StallGuard+™, CoolStep+™, µDcStep, SpreadCycle, StallGuard2™, and CoolStep™, enhance motion quality, efficiency, and robustness. Combined with 256-microsteps operation, passive braking, and freewheeling modes, these control technologies provide smooth, reliable operation while reducing power consumption and audible noise.

The device supports both SPI and STEP/DIR control interfaces and includes extensive diagnostic, monitoring, and protection functions, including the real-time on-chip scope interface (RT-OCSI).

The TMC2262-EVAL board enables evaluation of the TMC2262 using TMCL-IDE or the PyTrinamic™ Python package.

Applicable Parts

Getting Started

Required Items

  • TMC2262-EVAL (included)
  • Landungsbruecke board (included) with the latest TMC-EvalSystem firmware 
  • Eselsbruecke board (included) 
  • A compatible motor (for example, a Qmot stepper motor)
  • Power supply (4.5V to 65V; power connector included in the kit)
  • Cables to interface the motor, encoders, and the power supply 
  • USB-C data cable
  • PC with the latest TMCL-IDE (the integrated development environment for ADI Trinamic™ modules)
  • TMC2262 data sheet