EVAL-ADAQ7769-1
Overview
Features and Benefits
- Fully featured evaluation board for the ADAQ7769-1
- On-board IEPE sensor interface
- On-board reference and power supply circuits
- PC software for control and data analysis of time and frequency domain
- FMC-LPC system board connector ZedBoard™-compatible
- Optional PMOD connector
Product Details
The EV-ADAQ7769-1FMC1Z evaluation kit enables simple evaluation of the ADAQ7769-1, a high input impedance, programmable gain, anti-alias, 24-bit, 1MSPS, μModule® data acquisition (DAQ) solution. The EV-ADAQ7769-1FMC1Z is used alongside a downloadable evaluation software to fully configure the features of the ADAQ7769-1 and display the conversion results in the time and frequency domains.
The EV-ADAQ7769-1FMC1Z connects to the USB port of a PC via the Digilent ZedBoard™. By default, the 3.3V rail is supplied by the ZedBoard™ and regulated by the on-board power solution to +20V, −16V, and +5.3V to power the ADAQ7769-1 and its support components. An integrated electronic piezoelectric (IEPE)-interface is included to support the evaluation of the ADAQ7769-1 using an IEPE sensor.
For a full description of the ADAQ7769-1, see the ADAQ7769-1 data sheet, which must be consulted in conjunction with this user guide when using the EV-ADAQ7769-1FMC1Z evaluation board. For the current schematic, layouts, and bill of materials, see the EVAL-ADAQ7769-1 product page.
Applicable Parts
Getting Started
EQUIPMENT NEEDED
- Digilent ZedBoard™ with 12V wall adapter power supply
- DC and AC signal source (Audio Precision® or similar high performance signal source)
- PC running Windows® 7 or later, with USB 2.0 port