MAX3485AE

PRODUCTION

+3.3V-Powered, ±20kV ESD-Protected, 20Mbps and Slew-Rate-Limited RS-485/RS-422 Transceivers

High ESD protection increases robustness and reliability of industrial end equipment

Data Sheet (Rev. 1) Product Selection Table
Viewing:

Overview

  • Integrated Protection Increases Robustness
    • High ESD Protection
      • ±20kV HBM ESD per JEDEC JS-001-2012
      • ±15kV Air Gap per IEC 61000-4-2
      • ±8kV Contact ESD per IEC 61000-4-2
    • Short-Circuit Protected Outputs
    • True Fail-Safe Receiver Prevents False Transition on Receiver Input Short or Open Events
    • Hot-Swap Capability Eliminates False Transitions During Power-Up or Hot Insertion
  • High-Speed Data Rates up to 20Mbps
  • Up to -40°C to +125°C Operating Temperature
  • Allows Up to 128 Transceivers on the Bus

Devices in the MAX3483AE family (MAX3483AE/MAX3485AE/MAX3488AE/MAX3490AE/MAX3491AE) are ±20kV ESD-protected RS-485/422 transceivers, optimized for extended cable runs in noisy environments. All devices operate from a single 3.3V supply.

The MAX3483AE and MAX3485AE are half-duplex transceivers. The MAX3488AE, MAX3490AE, and MAX3491AE are full-duplex transceivers. The MAX3483AE/85AE have a 1-unit load receiver input impedance, allowing up to 32 transceivers on the bus. The MAX3488AE/90AE/91AE have a 1/4-unit load receiver input impedance, allowing up to 128 transceivers on the bus. Each transceiver includes a fail-safe receiver, ensuring that the receiver output (RO) is high when inputs are shorted, open, or connected to a three-state bus.

The MAX3483AE, MAX3485AE, MAX3488AE, and MAX3490AE are available in industry standard 8-pin SO package, while the MAX3491AE is available in a 14-pin SO package.

Mobile App

Applications

  • Industrial-Control Local Area Networks
  • Telecommuncations
  • Transceivers for EMI-Sensitive Applications
MAX3485AE
+3.3V-Powered, ±20kV ESD-Protected, 20Mbps and Slew-Rate-Limited RS-485/RS-422 Transceivers
MAX3483AE, MAX3485AE, MAX3488AE, MAX3490AE, MAX3491AE: Functional Diagram
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Technical Articles 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Latest Discussions

2 Years Ago
Interceptor Assignments
2 Years Ago
Interceptor List for Interface parts
View related discussion on EngineerZone®

Recently Viewed