Part Details
  • Fully compliant with SCSI-1, 2, and 3
  • Actively terminates nine signal lines
  • Supports actively negated SCSI signals
  • Laser-trimmed 110Ω termination resistors with 2% tolerance
  • Low drop-out voltage regulator
  • Onboard thermal shutdown circuitry
  • Operating range:
    • -1.0V to +7.0V
    • 0°C to +70°C
Additional Details
show more Icon

The DS2114 is designed to terminate cable assemblies and devices that do not require isolation from the SCSI bus. The small package integrates a voltage regulator and nine precisely trimmed 1100Ω resistors that actively terminate nine signal lines in compliance with SCSI-1, -2, and -3 standards.

SCSI termination is used wherever data must be transmitted without voltage drops caused by signal reflection at the parallel bus termination point, which is often significant in multidropped systems.

All Dallas terminators feature power-down mode with extremely low-quiescent consumption. Different SCSI terminators are available to match every existing SCSI protocol and to address different design concerns, such as price, board space, and voltage differential.

close icon
Software & Part Ecosystem

Software & Part Ecosystem

Recently Viewed