DS1249AB

RECOMMENDED FOR NEW DESIGNS

2048k Nonvolatile SRAM

Data Sheet (Rev. 3) Product Selection Table
Viewing:

Overview

  • 10 years minimum data retention in the absence of external power
  • Data is automatically protected during power loss
  • Unlimited write cycles
  • Low-power CMOS operation
  • Read and write access times of 70ns
  • Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time
  • Full ±10% VCC operating range (DS1249Y)
  • Optional ±5% VCC operating range (DS1249AB)
  • Optional industrial temperature range of -40°C to +85°C; designated IND
  • JEDEC standard 32-pin DIP package

The DS1249 2048k Nonvolatile (NV) SRAMs are 2,097,152-bit, fully static, nonvolatile SRAMs organized as 262,144 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is utomatically switched on and write protection is unconditionally enabled to prevent data corruption. There is no limit on the number of write cycles which can be executed and no additional support circuitry is required for microprocessor interfacing.
DS1249AB
2048k Nonvolatile SRAM
DS1249AB, DS1249Y: Pin Assignment
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Design Note 4

Technical Articles 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Latest Discussions

No discussions on DS1249AB yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed