ADV7992

RECOMMENDED FOR NEW DESIGNS

Car Camera Bus Transmitter with Parallel Video Input

Viewing:

Overview

  • C2B transmits video and bidirectional control data over a differential pair cable up to 30 meters or single-ended cable up to 15 meters
  • The parallel video input formats supported include
    • 8-/10-/12-bit interleaved Y/C data up to 148.5 MHz
    • 2 × 8-bit separate Y/C data up to 74.25 MHz
    • Embedded (SAV/EAV codes), separate HS/VS/DE or ISP line/frame valid type external timing signals
  • HD video formats supported up to 2 megapixels at 30 Hz or 1 megapixel at 60 Hz
  • Bidirectional control channel embedded in the C2B link for control and status data between C2B receiver and C2B transmitter
    • Enables remote configuration from the C2B receiver
  • Bidirectional GPIO with either local or remote interfacing possibilities
  • On-chip high resolution, high speed DAC, buffer and filtering blocks for video and control channel path
  • Transmission of frame count data from ISP to enable the back-end ECU or head unit to detect stuck or skipped frames
  • Video test pattern generator for simplified system testing
  • Protection from high voltages encountered during short to battery (STB) fault condition
  • Tested to industry standards for automotive EMC/EMI/ESD robustness

General

  • C2B transmits video and bidirectional control data over low cost, un-shielded differential pair cable
  • −40°C to +105°C temperature grade
  • 32-lead and 40-lead LFCSP packages
  • AEC-Q100 qualified for automotive applications

Applications

  • Automotive camera modules
  • Automotive camera ECUs
  • Automotive infotainment head units
C2B U.S. patents pending.
 
 

ADV7992
Car Camera Bus Transmitter with Parallel Video Input
ADV7992-7993 Functional Block Diagram
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Latest Discussions

Recently Viewed