LTC1337

PRODUCTION

5V Low Power RS232 3-Driver/5-Receiver Transceiver

Viewing:

Overview

  • Low Supply Current: 300µA
  • ESD Protection: Over ±10kV
  • 1µA Supply Current in Shutdown
  • Operates from a Single 5V Supply
  • Uses Small Capacitors: 0.1µF
  • Operates to 120k Baud
  • Three-State Outputs Are High Impedance When Off
  • Output Overvoltage Does Not Force Current Back into Supplies
  • RS232 I/O Lines Can Be Forced to ±25V without Damage
  • Pin Compatible with LT®1137A and LT1237
  • Flowthrough Architecture

The LTC1337 is a 3-driver/5-receiver RS232 transceiver with very low supply current. In the no load condition, the supply current is only 300µA. The charge pump only requires four 0.1µF capacitors and can supply up to 12mA of extra current to power external circuitry.

In Shutdown mode, the supply current is further reduced to 1µA. All RS232 outputs assume a high impedance state in Shutdown and with the power off.

The LTC1337 is fully compliant with all data rate and overvoltage RS232 specifications. The transceiver can operate up to 120k baud with a 1000pF//3kΩ load. Both driver outputs and receiver inputs can be forced to ±25V without damage, and can survive multiple ±10kV ESD strikes.

Applications

  • Notebook Computers
  • Palmtop Computers

LTC1337
5V Low Power RS232 3-Driver/5-Receiver Transceiver
3-Drivers/5-Receivers with Shutdown  Supply Current Product Package 1
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Latest Discussions

Recently Viewed