UG-476: PLL Software Installation Guide12/21/2018
UG-161: PLL Frequency Synthesizer Evaluation Board9/14/2015
UG-476: PLL Software Installation Guide8/10/2015
UG-164: 1750 MHz Evaluation Board for the PLL Frequency Synthesizer8/4/2011
UG-163: GSM900 Evaluation Board for PLL Frequency Synthesizer5/23/2011
This page contains ordering information for the evaluation board used to evaluate the ADF4113 Single, Integer-N 4.0 GHz PLL with Programmable Prescaler and Charge Pump.
This evaluation board requires an SDP Controller board for connection to the PC. The SDP controller board connects to the PC via USB 2.0. The evaluation board will connect to the SDP controller board. The evaluation board cannot be connected directly to the PC. The evaluation software running on the PC will communicate through the SDP Controller board, to the evaluation board. The SDP Controller board is a separate list item in the ordering guide below (EVAL-SDP-CS1Z). If you have not previously purchased an SDP Controller board, please do so to ensure a full evaluation setup.
- ADF4113 Evaluation Board (EV-ADF411XSD1Z)
- SDP Controller Board
Documentation & Resources
ADF411X - Design Files11/9/2020
Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.