MAX77812EVKIT

Evaluation Kit for the MAX77812

顶部

概览

优势和特点
产品详情

优势和特点

20A Maximum Output Current (5A per phase)
V_IN Range: 2.5V to 5.5V
V_OUT Range: 0.250V to 1.525V with 5mV Steps
±0.5% Initial Output Accuracy with Differential Sensing
5 User-selectable Phase Configurations
91% Peak Efficiency (V_IN = 3.8V, V_OUT = 1.1V)
Auto (SKIP/PWM) and Forced PWM Modes
Enhanced Load Transient Response
Programmable Ramp-up/down Slew Rates
Programmable Startup/Shutdown Sequence
UVLO, Short-Circuit, and Thermal Protections
2 User-programmable General-Purpose Inputs
3.4MHz High Speed I²C and 30MHz SPI Interface
3.408mm x 3.368mm 64-Bumps WLP Package

产品详情

The MAX77812 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB) that demonstrates the MAX77812. The EV kit allows for easy evaluation of each feature. It supports user-programmable phase configuration to one of five options:

Single output in 4 phase configuration (default)
Dual outputs in 3 + 1 phase configuration
Dual outputs in 2 + 2 phase configuration
Three outputs in 2 + 1 + 1 phase configuration
Four outputs in 1 + 1 + 1 + 1 phase configuration

A Micro-B USB cable is included in the package to serve as the USB to I²C interface for easy testing. Windows®- based software provides a user-friendly interface to exercise the features of the MAX77812. This software offers a graphical user interface (GUI) as well as a register-based interface.