AD9354:  WiMAX/WiBRO RF MxFE™ MISO Transceiver

  • 製品詳細


  • 資料


  • 評価用キット、
    シンボル & フットプリント

    & フットプリント



The AD9354 is a fully integrated dual receiver, single transmitter for mobile and fixed WiMAX /WiBRO wireless network systems. The RF MXFE combines the RF front-end with mixed-signal base-band enabling an easy-to-use digital interface ADI/Q™ to the base-band ASIC or FPGA. The AD9354 operates in the 2.3 to 2.7 GHz range. Channel bandwidths of 3.5, 4.375, 5, 7, 8.75, and 10 MHz are supported.

The direct-conversion receivers have state-of-the-art noise figure and linearity and require no external components with the exception of baluns. The complete RF sub-system integrates autonomous AGC loops and DC offset corrections, thus eliminating the need for high-speed interaction with the base-band processor.

The received signal is digitized with a set of four high dynamic range ADCs. Decimation and channel filters produce a 10-bit output signal at the appropriate sample rate determined by the bandwidth mode. The transmit path takes a 10-bit input data and interpolates before converting to the analog domain and up-converting to the carrier frequency.

The highly linear transmit path has excellent spectral purity with side-band noise less than -134 dBc/Hz at 22 MHz offset and offers EVM of -38 dB at 0 dBm output power. The transmit power is detected by an accurate power detector with a range of 58 dB and 0.25 dB steps. The output power can be calibrated at the factory by a single measurement.

The reference frequency is produced by an internal crystal oscillator with digital programmable frequency with 0.012 ppm resolution thus reducing the total BOM of the device.

An internal auxiliary ADC, an auxiliary DAC, and temp sensor are available for system monitoring and control. Four general purpose I/Os are also included and can be register programmed or automatically sequenced by a user-defined state machine. Mode control is via a 4-wire serial port and 4 real-time I/O control pins. The AD9354 is powered from a single 3.3V supply and contains on chip LDO's. The AD9354 is packaged in an 8 x 8 mm, 56 lead LFCSP.


  • RF Transceiver with Integrated ADCs and DACs
  • IEEE 802.16 WiMAX/ WiBRO
  • Operates over the 2.3 to 2.7 GHz Band
  • Dual Receivers for improved link Margin, Single Transmit
  • 3.5MHz < BW < 10MHz
  • Superior Receiver sensitivity with NF 3.0 dB
  • Highly linear and spectrally pure transmitter
    Transmitter EVM –38 dB @ 0 dBm POUT
    SNR > 134dB/Hz at Foffset > 22MHz
  • TX power control
    Range 58 dB, Resolution 0.25 dB
  • Autonomous AGC and TX Power Control
  • Automatic Frequency Correction < 0.012 ppm
  • Integrated Frac-N Synthesizer
    50 Hz LO step size
    Integrated phase noise < 0.4°rms
  • Digital I/O supply voltage range: 1.2 V to 3.3 V

Functional Block Diagram for AD9354

Of Note ...

This product is designed for a highly specific application. The detailed data sheet contains information about proprietary technology, and is only available to customers whose requirements closely match this application and will require a separate NDA. To request a data sheet, please contact the Integrated Transceivers Development Group and provide the following information: end application, annual usage/year, and baseband development strategy.

Unfortunately, we are unable to respond to requests that do not meet our qualification criteria. Technical support for this product is NOT available from our normal Tech Support desk.

For additional information downloads and an overview of ADI's integrated transceiver technology, please click here.

AD9354/AD9355 Product Brief


アナログ・デバイセズでは、以下の情報を定期的に配信しています。メール形式はHTMLまたはTEXT形式のどちらかを選んで購読していただけます。 ぜひ、製品の設計や開発にお役立てください。

【myAnalog 今週の新着情報(ウィークリーメール)



タイトル コンテンツの種類 ファイル形式
AD9354: WiMAX/WiBro RF MxFE MISO Transceiver Special 2-PG Data Sheet (Rev SpA, 03/2009) (pdf, 56 kB)  データシート PDF
Understand Receiver Dynamic Range and AGC Tradeoffs in WiMAX Femtocells and Picocells
By Manish Manglani, Tony Montalvo, and Chris Cloninger, Analog Devices, Inc. (Planet Analog, 8/2008)
技術関連記事 HTML
Expanding the Role of WiMAX CPE Transceivers into Base Station Applications
By Patrick Wiers, Analog Devices (RF Designline, 8/2008)
技術関連記事 HTML
RF Transceivers Target Small-Form-Factor Mobile WiMAX
(Planet Analog, 10/15/2007)
関連記事 HTML
AD9354/AD9355: Next Generation Radio Frequency Transceivers Product Brief  (pdf, 1267 kB) 関連記事 PDF
RF-to-Digital Baseband Transceivers Simplify Mobile WiMAX Design
(RF Design, 9/27/2007)
関連記事 HTML
RF設計ツールの新バージョン「ADIsimRF Version 1.6」を発表 (16 Feb 2012) プレス・リリース HTML
RF Source Booklet  (PDF, 4353 kB)
RF IC Product Overview - Version P (02/2014)
その他 PDF
Rarely Asked Questions...アナログ・デバイセズに寄せられた珍問/難問集 RAQ(珍問/難問集) HTML
外形寸法図のBSCとは? FAQ(よくある質問) & RAQ(珍問/難問集) HTML
Pwr Dissとは? FAQ(よくある質問) & RAQ(珍問/難問集) HTML
ICの寿命や製品保証の資料は? FAQ(よくある質問) & RAQ(珍問/難問集) HTML
デシケータ管理条件 FAQ(よくある質問) & RAQ(珍問/難問集) HTML
半導体用語集 用語集 HTML

評価用キット / シンボル & フットプリント


この製品に対するご感想 X
content here.
content here.