ADuCM4050

Ultra Low Power ARM Cortex-M4F MCU with Integrated Power Management


Manufactured by:

Product Details

The ADuCM4050 microcontroller unit (MCU) is an ultra low power integrated microcontroller system with integrated power management for processing, control, and connectivity. The MCU system is based on the ARM Cortex-M4F processor. The MCU also has a collection of digital peripherals, embedded SRAM and flash memory, and an analog subsystem which provides clocking, reset, and power management capability in addition to an analog-to-digital converter (ADC) subsystem.

The system features include the following:


  • Up to 52 MHz ARM Cortex-M4F processor
  • 512 KB of embedded flash memory with error correction code (ECC)
  • Optional 4 KB cache for lower active power
  • 128 KB system SRAM with parity
  • Power management unit (PMU)
  • Multilayer advanced microcontroller bus architecture (AMBA) bus matrix
  • Central direct memory access (DMA) controller
  • Beeper interface
  • Crypto hardware supporting advanced encryption standard (AES) -128, AES-256 along with various modes (electronic code book (ECB), cipher block chaining (CBC), counter (CTR), cipher block chaining-message authentication code (CCM/CCM*) modes) and secure hash algorithm (SHA)-256
  • Protected key storage with key wrap-unwrap
    Keyed HMAC with key unwrap
  • Serial port (SPORT), serial peripheral interface (SPI), inter integrated (I2C), and universal asynchronous receiver/transmitter (UART) peripheral interfaces
  • Real-time clock (RTC)
  • General-purpose and watchdog timers
  • Programmable general-purpose input/output (GPIO) pins
  • Hardware cyclic redundancy check (CRC) calculator with programmable generator polynomial
  • Power on reset (POR) and power supply monitor (PSM)
  • 12-bit successive approximation register (SAR) ADC
  • True random number generator (TRNG)
  • RGB timer for driving RGB LED

Applications

  • IoT
    • Smart machine, Smart city, Smart building, Smart metering, Smart agriculture, Sensor network
  • Wearables
    • Fitness and Clinical

Product Lifecycle

checked Pre-Release

This product is new and engineering validation may still be underway. Quantities may be limited and design specifications may change while we ready the product for release to production.

Evaluation Kits

(2)

X +

ADZS-U4050WL-EZKIT

ADZS-U4050WL-EZKIT Circuit Diagram

ADZS-U4050WL-EZKIT Photo

Product Details

The ADuCM4050WL EZ-KIT® and ADuCM4050LF EZ-KIT®, Analog Devices, Inc. are an evaluation system for the ADuCM4050 MCU, for the WLCSP and LFCSP packages respectively.


The ADuCM4050 processor is an ultra low-power integrated mixed-signal microcontroller system for processing, control and connectivity. The MCU system is based on the ARM Cortex-M4F processor. The MCU also has a collection of digital peripherals, embedded SRAM and flash memory, and an analog subsystem which provides clocking, reset, and power management capability in addition to an ADC subsystem.


The EZ-KIT contains an array of three connectors that support the ADF7xxx Wireless Transceiver series of daughterboard products. Refer to ADF7xxx Wireless Transceiver Daughterboard Interface for more information.


The EZ-KIT contains Expansion Interface 3 (EI3) and Arduino interfaces. These interfaces provide connections for daughterboards to expand the functionality of the EZ-KIT. Refer to Expansion Interface 3 and Arduino Interface for more information.


The evaluation board is designed to be used with with the IAR, Keil or CrossCore Embedded Studio development environments for advanced application code development and debug, such as:


  • Create, compile, assemble, and link application programs written in C++, C, and assembly
  • Load, run, step, halt, and set breakpoints in application programs
  • Read and write data and program memory
  • Read and write core and peripheral registers

ADZS-U4050LF-EZKIT

ADZS-U4050LF-EZKIT Circuit Diagram

ADZS-U4050LF-EZKIT Photo

Product Details

The ADuCM4050WL EZ-KIT® and ADuCM4050LF EZ-KIT®, Analog Devices, Inc. are an evaluation system for the ADuCM4050 MCU, for the WLCSP and LFCSP packages respectively.


The ADuCM4050 processor is an ultra low-power integrated mixed-signal microcontroller system for processing, control and connectivity. The MCU system is based on the ARM Cortex-M4F processor. The MCU also has a collection of digital peripherals, embedded SRAM and flash memory, and an analog subsystem which provides clocking, reset, and power management capability in addition to an ADC subsystem.


The EZ-KIT contains an array of three connectors that support the ADF7xxx Wireless Transceiver series of daughterboard products. Refer to ADF7xxx Wireless Transceiver Daughterboard Interface for more information.


The EZ-KIT contains Expansion Interface 3 (EI3) and Arduino interfaces. These interfaces provide connections for daughterboards to expand the functionality of the EZ-KIT. Refer to Expansion Interface 3 and Arduino Interface for more information


The evaluation board is designed to be used with with the IAR, Keil or CrossCore Embedded Studio development environments for advanced application code development and debug, such as:


  • Create, compile, assemble, and link application programs written in C++, C, and assembly
  • Load, run, step, halt, and set breakpoints in application programs
  • Read and write data and program memory
  • Read and write core and peripheral registers

Software & Systems Requirements

X+

Software Development Tools

Tools & Simulations

X +

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADUCM4050 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints

Discussions

X+
Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

X+
Back
Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 
Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.