The ADM488 and ADM489 are low power differential line transceiver suitable for communication on multipoint bus transmission lines.
They are intended for balanced data transmission and comply with both EIA Standards RS-485 and RS-422. Both products contains a single differential line driver and a single differential line receiver making them suitable for full duplex data transfer.
The ADM489 contains an additional receiver and driver enable control.
The input impedance is 12 kohms, allowing 32 transceivers to be connected on the bus.
The ADM488/ADM489 operates from a single +5 V ± 10% power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry.
The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating). The ADM488/ADM489 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology.
The ADM488/ADM489 is fully specified over the industrial temperature range and is available in DIP, SOIC and TSSOP packages.
|Title||Content Type||File Type|
|ADM488/ADM489: Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers Data Sheet (Rev D, 04/2006) (pdf, 379 kB)||Data Sheets|
|AN-960: RS-485/RS-422 Circuit Implementation Guide (pdf, 245 kB)||Application Notes|
Solving Isolation Challenges in Industrial Automation
This webcast will discuss the role isolation plays in providing protection and reducing the system bit-error-rate, using the specific design challenges of an RS-485 network. Topics to be covered in this presentation will include: Why and when one should isolate, Types of isolation and their advantages, Design Considerations for an RS-485 node (and how this translates to design considerations for signal isolation) as well as many other topics.
EMC, CE Mark, IEC801... What's it all about?
... New devices to ease the job.
(Analog Dialogue, Vol. 30, No. 4)
|Interface Parametric Search||Product Selection Guide||HTML|
|Brochure: Motor and Power Control Solutions (pdf)||Overview|
|Industrial Automation Solutions (pdf, 6110 kB)||Overview|
|Emerging Energy Applications Solutions Bulletin, Volume 10, Issue 4 (pdf, 1496 kB)||Solutions Bulletins|
|Test & Instrumentation Solutions Bulletin, Volume 10, Issue 3 (pdf, 1334 kB)||Solutions Bulletins|
|RAQs index||Rarely Asked Questions||HTML|
|Glossary of EE Terms||Glossary||HTML|
|Price||RoHS||View PCN/ PDN||Check Inventory/
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.