Save time and deliver your solutions faster with ADI’s new suite of precision technology signal chains. Align your applications ranging from Smart Industry to Instrumentation, Electrification to Digital Health, to exactly the right precision technology combinations.

Tailor your signal chain with confidence

ADR130

PRODUCTION

Precision Series Sub-Band Gap Voltage Reference

Data Sheet (Rev. D) Product Selection Table

Viewing:

Part Details

Initial accuracy
- A Grade: ±0.70% (maximum)
- B Grade: ±0.35% (maximum)
Maximum temperature coefficient
- A Grade: 50 ppm/°C
- B-Grade: 25 ppm/°C
C_LOAD = 0.1 μF to 1 μF

Output current: +4 mA/−2 mA
Low operating current: 80 µA (typical)
Output noise: 6 µVp-p @ 1.0 V output
Input range: 2.0 V to 18 V
Temperature range: −40°C to +125°C
Tiny, Pb-free TSOT-23 package

Evaluation Kits

Ultra-low Distortion Signal Generator Measurement Module

Buy Now View Details

Features and Benefits

Ultra-low distortion, high-resolution source
- DC, 50Hz to 40kHz Frequency Range
- Proprietary digital pre-distortion (DPD) algorithm
- –130dBc THD @ 1kHz (typ.)
- Arbitrary waveform generation (AWG) with on-board pattern memory
- Differential (balanced) output up to 3.6VRMS
Fast pattern switching between multiple stored waveforms
Small form-factor (60mm x 40mm)
Low power, 1W typ. (quiescent)
SPI interface for integration into test and measurement systems

Product Details

The ADMX1002 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. With an easy-to-use SPI interface and small-form factor, the ADMX1002 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS

High-end audio test
Analog-to-digital converter characterization and test
Sensor and transducer test
Frequency response and network analysis
ATE

Resources

User Guide: ADMX1002, Ultra-low Distortion and Low Noise Signal Generator
4/16/2021

Software

ADMX100X Graphical User Interface (GUI)
9.35 M

Ultra-low Distortion Signal Generator Measurement Module with Fully Differential Input Acquisition Channel

Buy Now View Details

Features and Benefits

Ultra-low distortion, high-resolution source
- DC, 50Hz to 40kHz Frequency Range
- Proprietary digital pre-distortion (DPD) algorithm
- –130dBc THD @ 1kHz (typ.)
- Arbitrary waveform generation (AWG) with on-board pattern memory
- Differential (balanced) output up to 3.5VRMS
- Fast pattern switching between multiple stored waveforms
Fully Differential input Acquisition Channel
Small form-factor (60mm x 40mm)
Low power, 1W typ. (quiescent)
SPI interface for integration into test and measurement systems

Product Details

The ADMX1001 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator with an acquisition channel. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. The signal generator and the acquisition channel can be individually controlled using separate, easy to use, SPI interfaces - combined with the module's small-form factor, the ADMX1001 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS