Condition Monitoring Sensor with Single Pair Ethernet Connectivity
Analog Devices has released industry’s 1st 10Base-T1L MAC-PHY, the ADIN1110 which is a single pair ethernet transceiver with embedded MAC. This enables 10Mbit full Ethernet connectivity, with power and data over only 2 wires, up to a distance of 1km, in a 6x6mm LFCSP package. The sensor interface is SPI which enables the use of small, low-cost, low-power processors without an integrated MAC.
This demo shows Analog Devices' Galileo solution, which highlights the use of the ADIN1110 in a machine health application. In the demo a low power triaxial MEMS vibration sensor, the ADXL359, is Ethernet-enabled using a small embedded micro and the ADIN1110 to deliver high quality asset health history and IP addressability.
Condition Monitoring Sensor with Single Pair Ethernet Connectivity
This demo shows Analog Devices' Galileo solution, which highlights the use of the ADIN1110 in a machine health application. In the demo a low power triaxial MEMS vibration sensor, the ADXL359, is Ethernet-enabled using a small embedded micro and the ADIN1110 to deliver high quality asset health history and IP addressability.
{{modalTitle}}
{{modalDescription}}
{{dropdownTitle}}
- {{defaultSelectedText}} {{#each projectNames}}
- {{name}} {{/each}} {{#if newProjectText}}
-
{{newProjectText}}
{{/if}}
{{newProjectTitle}}
{{projectNameErrorText}}