Search

Filters
Filters
Tools and Models
- 70
Site Section
- 3,626
Results on Analog.com
Relevance
Sort by
- Resource_types.lvl0:Technical Documentation > Technical Articles
- Technical ArticlesJul 17, 2002Recommendations for software control of monocolor and bicolor LED graphic display boards using MAX6952 and MAX6953 5x7 Matrix LED drivers.
- Technical ArticlesJun 25, 2002This application note describes an application of the MAX2361 quadrature transmitter IC in the Korean PCS band (Tx = 1750-1780MHz).
- Technical ArticlesNov 21, 2003This technical note presents the performance and features of MAX2530 for 450MHz CDMA2000 in detail.
- Technical ArticlesMay 11, 2003This article describes VCO application issues such as load pulling, supply pushing, phase noise and affects of radiated energy of near-by power amplifiers (PAs). It is shown how these problems are mitigated by using a VCO buffer to isolate the oscill
- Technical ArticlesNov 21, 2003This article discusses important parameters to be considered when choosing whether to use an Integer-N or Fractional-N synthesizer with the MAX2902 transmitter IC.
- Technical ArticlesDec 1, 2012To meet the new standard, the National Highway Traffic Safety Administration (NHTSA) projects that automobile manufacturers will install rear mounted video cameras and in-vehicle displays.
- Technical ArticlesJan 31, 2013Radio system design is made easier by balancing various system characteristics and making tradeoffs that can affect both design performance and cost.
- Technical ArticlesMay 27, 2021With increasing safety regulations and demands for driver comfort, there is a need for more advanced automotive applications using in-cabin sensing. Find out more about the two key aspects driving the development of in-cabin sensing technologies.
- Technical ArticlesJun 29, 2012This article describes how to use the ISM-RF Crystal Calculator as a tool to select and configure the reference oscillator for various industrial/scientific/medical (ISM) radios.
- Technical ArticlesJan 9, 2012Use a switching regulator with ISM transmitter to maintain constant transmitted power over the battery voltage range. AC voltage ripple produced by a voltage converter does not degrade the quality of amplitude-shift keying (ASK) data link.