1. Data Sheet Errata
IE 浏览器的用户请注意: Analog.com 不再支持IE11浏览器。 请及时更新您的浏览器确保您在 analog.com 得到最佳体验

Documentation Errata

Chapter: 18 / Page 80

Doc ID: DOC-1762

Change

For the PWM_CHANCFG Configuration registers, the timer options are:

  • PWMAH \ AL – Timer 0 & Timer 1
  • PWMBH \ BL – Timer 0 & Timer 2
  • PWMCH \ CL – Timer 0 & Timer 3
  • PWMDH \ DL – Timer 0 & Timer 4

In Table 18-37:

For PWM_CHANCFG.REFTMRD, the bit description should be:

The PWM_CHANCFG.REFTMRD bit selects whether the PWM uses PWMTMR0 or PWMTMR4 as the reference timer for Channel D operation.

The enumerations description should be:

0 = PWMTMR0 is Channel D reference

1 = PWMTMR4 is Channel D reference


For PWM_CHANCFG.REFTMRC, the bit description should be:

The PWM_CHANCFG.REFTMRC bit selects whether the PWM uses PWMTMR0 or PWMTMR3 as the reference timer for Channel C operation.

The enumerations description should be:

0 = PWMTMR0 is Channel C reference

1 = PWMTMR3 is Channel C reference


For PWM_CHANCFG.REFTMRB, the bit description should be:

The PWM_CHANCFG.REFTMRB bit selects whether the PWM uses PWMTMR0 or PWMTMR2 as the reference timer for Channel B operation.

The enumerations description should be:

0 = PWMTMR0 is Channel B reference

1 = PWMTMR2 is Channel B reference

Chapter: 34 / Page 1

Doc ID: DOC-1703

Change

If a system reset occurs while the debugger is performing a system MMR access, the MMR transaction is lost completely.


Last Update Date: 2018-05-07