概览

优势和特点

  • Full Silicon Integration Allows for Improved Efficiency and Minimized Space
  • Input Voltage Range From 3.0V to 5.5V
  • Output Voltages Range From 0.5V to 1.275V
  • I2C Controlled Output Voltage (6.25mV Steps)
  • Excellent Load-Transient Response
  • Internally Programmable Compensation
  • High Switching Frequency of 2.2MHz
    • Forced PWM Mode
  • Enable and Reset Connections Available
  • Loop Measurements Ready
  • Proven PCB Layout
  • Fully Assembled and Tested

产品详情

The MAX20011B EV kit is a fully assembled and tested PCB intended to demonstrate the capability of the MAX20011B step-down (buck) voltage regulator. MAX20011B has output current rating of 12A. The IC operates at 3V to 5.5V input supply voltage and can regulate to a voltage range of 0.5V to 1.275V.

The device features a 2.2MHz fixed-frequency PWM mode for better noise immunity and load-transient response. The 2.2MHz frequency operation allows for the use of all ceramic capacitors and minimizes external components. The programmable spread-spectrum frequency modulation minimizes radiated electromagnetic emissions. Integrated low RDS(ON) switches improve efficiency at heavy loads and make the layout a much simpler task with respect to discrete solutions.

The I2C interface supports dynamic voltage adjustment with programmable slew rates. Other features include programmable soft-start, overcurrent, and overtemperature protections.

The EV kit comes pre-tested for immediate evaluation.

Applications

  • Automotive ADAS Systems
  • SoC Core Power

相关产品

在线购买

所示报价为单片价格

以上评估板报价仅供人民币结算及大陆购买使用， ADI均提供正规发票，如需美金结算及其他地区购买请直接跳转至英文页面进行购买。