Overview

Features and Benefits

  • High precision analog-to-digital converters (ADCs)  
  • Dual channel, simultaneous sampling
    I-ADC 20-bit Σ-Δ (minimizes range switching)
    VADC//TADC 20-bit Σ-Δ 
  • Programmable ADC conversion rate from 1 Hz to 8 kHz 
  • On-chip ±5 ppm/°C voltage reference 
  • Current channel  
    Fully differential, buffered input
    Programmable gain (from 4 to 512)
    ADC absolute input range: −200 mV to +300 mV
    Digital comparator with current accumulator feature 
  • Voltage channel
    Buffered, on-chip attenuator for 12 V battery input 
  • Temperature channel
    External and on-chip temperature sensor options 
  • Microcontroller
    ARM Cortex-M3 32-bit processor
    16.384 MHz precision oscillator with 1% accuracy
    Serial wire download (SWD) port supporting code download and debug 
  • Automotive qualified integrated local interconnect network (LIN) transceiver  
    LIN 2.2-compatible slave, 100 kb fast download option
    SAE J-2602 compatible slave
    Low electromagnetic emissions (EME)
    High electromagnetic immunity (EMI)
  • See data sheet for additional features 

Product Details

The ADuCM331 is a fully integrated, 8 kSPS, data acquisition system that incorporates dual, high performance multichannel sigma-delta (Σ-Δ) ADCs, 32-bit ARM® Cortex™-M3 processor and flash. The ADuCM331 has 128 kB program flash. and 4 kB data flash. The ADuCM331 is a complete system solution for battery monitoring in 12 V automotive applications. The ADuCM331 integrates all of the required features to precisely and intelligently monitor, process, and diagnose 12 V battery parameters including battery current, voltage, and temperature over a wide range of operating conditions. 

Minimizing external system components, the device is powered directly from a 12 V battery. On-chip, low dropout (LDO) regulators generate the supply voltage for two integrated Σ-Δ ADCs. The ADCs precisely measure battery current, voltage, and temperature to characterize the state of the health and the charge of the car battery. 

The device operates from an on chip, 16.384 MHz high frequency oscillator that supplies the system clock. This clock is routed through a programmable clock divider from which the core clock operating frequency is generated. The device also contains a 32 kHz oscillator for low power operation. 

The analog subsystem consists of an ADC with a programmable gain amplifier (PGA) that allows the monitoring of various current and voltage ranges. It also includes a precision reference on-chip. The ADuCM331 integrates a range of on-chip peripherals that can be configured under core software control as required in the application. These peripherals include a SPI serial input/output communication controller, six GPIO pins, one general-purpose timer, a wake-up timer, and a watchdog timer. The ADuCM331 is specifically designed to operate in battery-powered applications where low power operation is critical. The microcontroller core can be configured in normal operating mode, resulting in an overall system current consumption of <18.5 mA when all peripherals are active. The device can also be configured in a number of low power operating modes under direct program control, consuming <100 µA. The ADuCM331 also includes a LIN physical interface for single wire, high voltage communications in automotive environments. 

The device operates from an external 3.6 V to 18 V (on VDD, Pin 26) voltage supply and is specified over the −40°C to +115°C temperature range, with additional typical specifications at +125°C.

APPLICATIONS 

  • Battery sensing/management for automotive and light mobility vehicles 
  • Lead-acid battery measurement for power supplies in industrial and medical domains 

Product Lifecycle icon-recommended Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits (1)

Tools & Simulations

Design Tools

ADuCM330/ADuCM331 CMSIS Pack

Download this file to add support for the ADuCM330 and ADuCM331 to Keil uVision

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.