ADIS16133

±1200°/sec Precision Angular Rate Sensor
Manufactured by:

Product Details

The ADIS16133 iSensor® is a high performance, digital gyro-scope sensing system that operates autonomously and requires no user configuration to produce accurate rate sensing data. Key performance advantages include low noise density, wide bandwidth, low variation over temperature, and excellent in-run bias stability, all of which directly influence critical end perfor-mance goals for platform stabilization, navigation, robotics, and medical instrumentation systems.

This sensor system combines industry leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes the entire sensor signal chain for sensitivity and bias over a temperature range of −40°C to +85°C. As a result, each ADIS16133 has its own unique correction for-mulas to produce accurate measurements upon installation. For some systems, the factory calibration eliminates the need for system level calibration and greatly simplifies it for others. The ADIS16133 samples data at rates of up to 2048 SPS and offers an averaging/decimation filter structure for optimizing noise/bandwidth trade-offs. The serial peripheral interface (SPI) and user register structure provide easy access to configuration controls and calibrated sensor data for embedded processor platforms.

The 36 mm × 44 mm × 14 mm package provides four holes for simple mechanical attachment. Use M2 (or 2-56 standard size) machine screws along with a standard 24-pin, dual row, 1 mm pitch connector to support electrical attachment to a printed circuit board (PCB) or cable system. The ADIS16133 provides an operating temperature range of −40°C to +105°C.


Applications
  • Precision instrumentation
  • Platform stabilization and control
  • Industrial vehicle navigation
  • Downhole instrumentation
  • Robotics

Product Lifecycle

checked Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits

X +

ADIS16IMU1/PCBZ Circuit Diagram

Product Details

The ADIS16IMU1/PCBZ is a breakout board for many of the ADIS16xxx IMU and gyroscope products. It provides a series of tapped M2x0.4mm machine screw holes to support direct-mounting with several different package styles, along with a 16-pin, dual-row, 2mm connect interface that supports simple connection with remote processor boards, using up to 12 inches of a 1mm ribbon cable. The ADIS16IMU1/PCBZ serves as a partial replacement for several obsoleted evaluation tool. Please see the following list.

 

  • Replace ADIS16133/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16133BMLZ.
  • Replace ADIS16135/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16135BMLZ.
  • Replace ADIS16136/PCBZ with (1) ADIS16IMU1/PCBZ and
  • Replace ADIS16133/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16133BMLZ.
  • Replace ADIS16135/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16135BMLZ.
  • Replace ADIS16136/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16136AMLZ.
  • Replace ADIS16137/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16137AMLZ.
  • Replace ADIS16362/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16362BMLZ
  • Replace ADIS16364/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16364BMLZ
  • Replace ADIS16365/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16365BMLZ
  • Replace ADIS16367/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16367BMLZ
  • Replace ADIS16375/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16375BMLZ.
  • Replace ADIS16405/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16405BMLZ
  • Replace ADIS16407/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16407BMLZ
  • Replace ADIS16480/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16480AMLZ.
  • Replace ADIS16485/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16485AMLZ.
  • Replace ADIS16488/PCBZ with (1) ADIS16IMU1/PCBZ and (1) ADIS16488AMLZ.
NOTE: In some cases, the ADIS16IMU1/PCB will not be the same interface PCB that came with the older parts, but it provides the same basic function.

EVAL-ADIS Circuit Diagram

Product Details

The EVAL-ADIS system provides a simple, PC-based tool, for evaluating iSensor products, for those who are not ready to integrate them into embedded processor systems. This system supports application software that enable basic demonstration, individual register access and high-speed data capture for each supported device. Each application software package comes with an installation wizard, which facilitates simple installation and also includes a simple USB-driver package that is easy to use. All software packages associated with the EVAL-ADIS are compatible with Windows XP, Vista and 7 and provides both 32-bit and 64-bit USB drivers. The EVAL-ADIS circuit board is 0.125” thick, which enables pre-drilled, pre-tapped mounting holes for each iSensor device. The mounting holes accommodate M2x0.4mm machine screws. This kit also includes 5 sets of M2x0.4 machines screws, which provide for the various package thickness and eliminate the need to procure additional hardware. The integrated power system eliminates the need for external power supplies in most cases, but does provide for an external power supply input, for supply-sensitivity testing. The power system uses the USB’s +5V and provides a linear regulator option for +3.3V devices.

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADIS16133 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints

Discussions

X+

Didn't find what you were looking for?

Sample & Buy

X+
Back
Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 
Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.