Together with Xilinx, the world's leading provider of programmable platforms, Analog Devices develops industry-leading analog solutions to complement FPGA systems. Easy interface and connectivity of ADI components to Xilinx FPGAs is enabled through the use of FMC boards, FMC interposers, and Pmods. For additional seamless integration with Xilinx ecosystems and tools, ADI offers HDL interface code, device drivers, and reference designs.
Get answers to your design questions in the FPGA Reference Design support community
The AD9739A is a 14-Bit, 2.5 GSPS, RF Digital-to-Analog Converter (DAC). The FMC board integrates all analog components including an on-board PLL, and the kit includes all the tools necessary to get started immediately.
Application: High-speed communications systems
The AD9467 is a 16-Bit, 250 MSPS Analog-to-Digital Converter (ADC).
Applications: High-speed instrumentation, defense electronics, communications
The AD-FMCOMMS1-EBZ provides the analog front-end for a wide range of compute-intensive FPGA-based applications.
Features ADI leading data converters and other components for transmit, receive, clocking, and power.
Applications: Wireless communications, test & measurement, radar, data acquisition
The AD-ADC-FMC-ADP adapter board allows any of Analog Devices' High-Speed ADC Evaluation Boards to be used on certain Xilinx® evaluation boards with a FMC connector. The adapter board uses the High Pin Count (HPC) version of the FMC connector, so it can be used on either LPC or HPC hosts (such as the KC705 or VC707).
The AD-DAC-FMC-ADP adapter board allows any of Analog Devices' DPG2-compatiable High-Speed DAC Evaluation Boards to be used on a Xilinx® evaluation board with a FMC connector. The adapter board uses the Low Pin Count (LPC) version of the FMC connector, so it can be used on either LPC or HPC hosts (such as the ML605 or SP605).
The SDP-I-FMC enables easy connection of a wide variety of FPGA evaluation boards to the range of daughter boards from Analog Devices' System Demonstration Platform (SDP) family. The SDP-I-FMC has a Low Pin Count (LPC) FMC connector and a 120 pin connector to connect to SDP daughter boards. The SDP-I-FMC can only be used with 3.3VIO FPGA evaluation boards.
Digilent Pmod™ peripheral modules are small I/O interface boards that offer an ideal way to extend FPGA capabilities. These reference designs demonstrate how easy it is to add the small Pmod expansion modules to the FPGA board, and also provide excellent code examples for quick prototyping and testing of analog interfaces.
Featured ADI Technologies
Proven design for powering Xilinx 7 series FPGA devices. Meets tolerance and sequencing guidelines set by Xilinx. Uses ADP1850 dual output synchronous buck controller.
| Kintex KC705 | Virtex VC707 | Zynq ZC702 | ZedBoard | |
|---|---|---|---|---|
| ADV7511 |  |
|
|
|
| ADV7611 | (using Avnet FMC) |
(using Avnet FMC) |
||
| ADAU1761 | |
This module provides high-definition video interfaces for Xilinx® FMC-enabled baseboards, using the Analog Devices' ADV7511 HDMI transmitter and the ADV7611 HDMI receiver.
